Category Archives: David Richardson

Preorder Freaky Gothic!

Freaky Gothic, designed by Calum Alexander Watt and sculpted by David Richardson is now available for preorder! This 1/8 scale figure kit contains 24 resin pieces, detailed instructions, and concept art. This visitor from another world, lost in time has a head-height (not including the hat) of approximately 24cm and would be a great piece for any Steampunk or Historical Miniatures fan with a taste for the unique.

Preorder Freaky Gothic Here »

Price: $130 USD + Shipping
Estimated Shipping Date: 5.15.2013

freakygothic_04_lrg

Preorder Freaky Gothic Here »

iMech News 3.28.2013

Time again for a little news! Today we finally show off the Ian McQue Waldo as well as some housekeeping with release dates, etc.

Calum Watt’s Freaky Gothic »

freakygothic01

First-up is Freaky Gothic by Calum Watt and David Richardson. We’ve of course shown this before, so this is just a reminder that the tentative preorder start date is next Friday, 4.5.2013. I say tentative because I don’t have a casting quote yet as the master is in port-print clean-up and the caster hasn’t seen it yet. As always, as soon as I know, you’ll know! Until then, enjoy the pic and tell your friends! Click here to get a notification when the preorder starts.

Ian McQue’s Waldo »

waldo-00

I finished the master and etch design a few weeks ago and sent this to the caster for production. The tentative preorder start date is 5.1.2013 with the price being somewhere around $120 if all goes well with the casting quote. The Waldo has many resin parts, as well as 2 LARGE photoetch frets to make up the wheelhouse as well as other details, laser-cut windows that will be sandwiched between PE frames as you can see in the etch design image below, and a laser-cut and etched wooden deck. It’ll also come with string and wire to complete it. There’s a lot of detail and multimedia packed into this kit so it’ll be a lot of fun to construct and weather. The hollow 2-part hull has a full engine design inside of it that you can see through the grates on the deck or from the thruster hole below. The Waldo also comes with a 3D designed pilot by Ian McQue and Rishi Nandlaskar who sculpted the Deckhands set. More info on the actual price when info comes in. Click here to get a notification when the preorder starts.

waldo-04

1/35 Barrio Guy used for size reference.

waldo-02

 

FichtenFoo’s Implausible Long-Nose Submersible »

fishmkii-15

I started my pre-release build-up of the Implausible Long-Nose Submersible on FichtenFoo.com. Check out the pics and place your preorder today!

Preorder Updates »

The following PREorder items should be shippigng by 4.8.2013:

Calum Watt’s Freaky Gothic Update

Originally slated as a 1/12 scale release, David Richardson added more detail to Freaky when we decided to up the size to 1/8 scale. Check out the old pics here compared to the new ones with added detail. It’s going to be a fantastic piece when it goes into production! Click here to get a notification when Freaky Gothic will be available for preorder.

freakygothic01

Click to enlarge ^

 

 

Calum Watt’s Freaky Gothic

gothic03

As promised before my vacation last week, here’s some almost done renders of the upcoming Calum Watt “Freaky Gothic” modeled by the amazing David Richardson. Originally slated for 1/12 scale we’ve decided to increase that and do 1/8 scale instead. Seems that most of you want the figures to be larger and that’s fine. 1/8 scale should be a nice balance between size and costs making them more affordable than our 1/6 scale figures were. Price details to come. David is currently tightening up details and textures since we increased the scale. I’ll show close-up views of this when they’re available.

 

iMech News 9.26.2012

News! News! News!!! Lots of news today, but all good! Chompbot Sale, Ian McQue’s Sky Mark, Christophe Desse’s Aviators and Submariners, Dawn of the Apocalypse, FichtenFoo’s Long Nose Fish Sub, and Miguel Lopez Dustbuster!

Chompbot #5 Preorder Event

Don’t miss out on saving $10 on the Chompbot #5 and Chomp Troopers! Sale ends Friday at Midnight! (EST) Also check out my build-up pics of the Chompbot pre-release sample parts I’ve received so far from the casters.

ffcb-08

 

Ian McQue Sky Mark Print Materials and Art!

The Sky Mark production is coming along nice and quick! I’ll have 50 (out of 100 first ed) kits in a few weeks. No preorder for these so first come first served when the sale page starts. Meanwhile, enjoy this new Ian McQue art for the Sky Mark buoy as well as the instructions/box label pics.

buoyart-01

 

Dustbuster Print Materials

Dustbuster coming in another month or so! Meanwhile enjoy these packaging pics:

dbcover dbinstructions

 

Christophe Desse’s Aviators

Coming in about 30 days, Chistophe Desse’s Aviators! These 4 Steampunk inspired figures are sold as a set. The seated pilot will also be included with the Hornethopter’s next edition (also coming soon!) to replace the old pilot.

aviators-00 aviators-01

 

Christophe Desse’s Submariners

This maritime quartet will also be sold as a set and is the perfect accessory for our submersible releases! Set includes two swimmers and two “land-lubbers”. Available in about 60 days!

swimmers-01 swimmers-02 swimmers-03 swimmers-04

 

Longnose Fish Submersible Pilot Print

And the inspiration behind the Submariners is of course the Long Nose Fish Sub pilot that Christophe Desse also did for us. Here’s a few shots of the pilot print. Christophe is also working on a seated pilot that can be used for the original Fish Sub as well!

fishsub2pilot-02 fishsub2pilot-print

 

Dawn of the Apocalypse!

B2_box_cen

Finally… Announcing Dawn of the Apocalypse! These figures were designed and produced by us at Industria Mechanika for Dark World Creations. Check out the sexy and zombified creations below. More figures and post apocalyptic car kit mod sets on the way! The girls Ginger and Krystal were sculpted by David Richardson. Zombies Jared and Jessica were sculpted by Pedram Karimfazli. Show these guys some love and get yourself some fantastic 1/24 scale End of Civilization goodness!

 

Preordered Item Updates! »

First up is the preorder info. I have several casters working diligently on getting these done so that I can get them out the door and into your hands.
Ian McQue’s Remora 3rd Ed:  All Units Shipped!!!
Deckhands 1/35: All preordered units in-stock and shipping now!
Deckhands 1/24:
Waiting on casts. Once I receive them I’ll box and ship immediately as usual.
Sasha 1/24:
Available now!
Barrio 1/24:
Avialable now!
Barrio 1/35:
Waiting on casts. Once I receive them I’ll box and ship immediately as usual.
Chompbot #5, Troopers, Pilots: Waiting on casts. Once I receive them I’ll box and ship immediately as usual.
Orb Ship: Waiting on casts. Once I receive them I’ll box and ship immediately as usual.


Upcoming Preorders »

Upcoming preorder items: Dystopic, Dustbuster, and Ian McQue’s Sky Mark.

 

Restocks! »

Sasha 1/35, 1/32: Next batch coming soon for preorder!
Hornethopter: Lots of interest in this little beastie after we sold the last 10 at Wonderfest. I’ll attempt to restock these in October…. need to get some of our new scheduled releases out the door first and get the new pilots and pilot set cast.
FichtenFoo’s Fish-Shaped Submersible: Available Now!
Kastor: Same as the Hornethopter… planning to restock this one early December 2012.

Fill out the Notify Me to get info when a preorder is available for preorders.

iMech News 7.29.2012

Lots of news to go over today as I missed showing off a few things last week.

Frankenstein Printwork »

The artwork for Adrian Smith’s Frankenstein‘s box and instructions are at the printer and thankfully will be here in time for the 8/7/2012 release date. Frankenstein sports an awesome 49 resin parts, chain and real chain mail! Check out the samples below and click here to preorder.

fboxcoverl finstcoverl finstinsidel

 

New Hornethopter Pilots Set »

First I must apologize to Christophe Desse for not posting these sooner! He redesigned the Hornethopter pilots based loosely on my original hand-sculpts for the first few editions. The seated pilot will be available with the next release of the Hornethopter, while all four will be available as a separate set. No idea on price yet, but expect them in the store within 6-8 weeks.

hornet1 hornet3 hornet2 hornet4

 

Fish Sub Pilot Beginnings »

Christophe Desse is also busy designing a pilots set for the original and upcoming MkII Fish-Shaped submersibles. The next edition (6th) of the Mk I may not come with the figure, (as it won’t be ready in time for the next edition) but the first edition of the Mk II will and a sub pilots set including the seated pilots (for those that purchased the first 5 editions of the Mk I sub) will be available for everyone around the time of the Mk II release. Below you can see the base figure. Other pilot versions will have an old-timey tank-top swim suit style, hats, breathers, etc…

fisht1

 

Derek Stenning’s Dystopic Update »

Not much new to show here, but I wanted to let everyone know that Dystopic is coming soon! The print will be done in 4-5 days I’m told, then clean-up, then onto production. We’re still looking at October for a preorder/release. Below you can see how the parts-breakup will look. Each color is a separate printed kit part.

cuts

 

Futuristic Loader Update »

A few new images of the Futuristic loader. I brought up that there was no leg support for this heavy lifter so the team collaborated and came up with this great-looking result. I’ve added it to the calendar as a tentative November preorder/release.

loader3 loader4

 

Release Calendar »

Please see here for the updated release calendar.

Preordered Item Updates! »

First up is the preorder info. I have several casters working diligently on getting these done so that I can get them out the door and into your hands.
Adrian Smith’s Frankenstein:
Shipping ~August 7th Preorder Frankenstein here »
Ian McQue’s Remora 3rd Ed: Shipping ~August 7th Preorder Remora here »
Deckhands 1/35: The box of casts was lost in the mail almost 6 weeks ago. We’re working on the next batch as fast as we can. Once I receive them I’ll box and ship immediately as usual.
Deckhands 1/24:
Waiting on casts Once I receive them I’ll box and ship immediately as usual.

Upcoming Preorders »

Upcoming preorder items: Chompbot #5, Chomp Troopers, Sasha 1/24, Barrio Guy 1/35, Barrio Guy 1/24, Orbship, and Dustbuster.

Restocks! »

Sasha 1/35: Next batch coming soon for preorder!
Hornethopter: Lots of interest in this little beastie after we sold the last 10 at Wonderfest. I’ll attempt to restock these in August or September…. need to get some of our new scheduled releases out the door first.
FichtenFoo’s Fish-Shaped Submersible: Gave the master back to the caster to start molding for a 6th run! Planning to restock this one early Fall 2012.
Kastor: Same as the Hornethopter… planning to restock this one early Fall 2012.

Fill out the Notify Me to get info when a preorder is available.

iMech News 7.5.2012

Chompbot #5 Print Materials »

cb5-sample-label

Thought you’d like to see the print works for the upcoming Chompbot #5 release. Still working on the labels/instructions for the figures, but these are done and out the door. (there was corrections made to these prior to print if you can see the errors. ;-) )

cb5-sample-inst

As you can see the cover of the instructions is also a frame-able print of Jake Parkers Chompbot/Trooper art! We’ll roll these instead of folding them to place into the boxes of course.

The master for the bot is at BLAP Models for casting and the figures are at Collapse Industries. When they’re close to all ready, we’ll start the preorder for these. Probably next month (August 2012) as we’re still playing catch-up.

Futuristic Figures Coming Soon! »

You may have seen these posted on the Futuristic Facebook page. These figures have been 3D sculpted by David Richardson based on designs by Walter Pezalli and Vincent Roucher (Of Stan and Vince). They’ll be available initially in 1/20 scale to go with the Futuristic Robots (available here) with the potential for a 1/35 scale release as well. Here are some preliminary shots. Almost done… just tweaking the poses and equipment.

loader1 loader2 technician

Steampunk Contest Voting »

Voting is done for the Steampunk Costume Contest. I’m tallying the results and will let everyone know the winner ASAP!

Preordered Item Updates! »

First up is the preorder info. I have several casters working diligently on getting these done so that I can get them out the door and into your hands.
Sasha 1/35:
All 1/35 Sashas have shipped UNLESS they’re paired with a 1/35 Deckhands set and need shipped together.
Sasha 1/32:
Replacement casts shipped 6.20.2012 to those of you that filled out the replacement form.
Deckhands 1/35: The box of casts was lost in the mail almost 3 weeks ago. We’re working on the next batch as fast as we can. Once I receive them I’ll box and ship immediately as usual.
Deckhands 1/24:
Waiting on casts Once I receive them I’ll box and ship immediately as usual.

Upcoming Preorders »

Remora 3rd Edition: Preorder Remora here »
Frankenstein 1st Edition: Preorder Frankenstein here »
Other upcoming preorder items: Chompbot #5, Chomp TroopersSasha 1/24, Barrio Guy 1/35, Barrio Guy 1/24, Orbship, and Dustbuster.

Restocks! »

Sasha 1/35: Next batch coming soon for preorder!
Hornethopter: Lots of interest in this little beastie after we sold the last 10 at Wonderfest. I’ll attempt to restock these in August or September…. need to get some of our new scheduled releases out the door first.
FichtenFoo’s Fish-Shaped Submersible: Gave the master back to the caster to start molding for a 6th run! Planning to restock this one early Fall 2012.
Kastor: Same as the Hornethopter… planning to restock this one early Fall 2012.

Fill out the Notify Me to get info when a preorder is available.

iMech News 6.16.2012

Really big update today ladies and gents! Three new designs and one announced a while ago seemingly risen from the dead. And of course the usual preorder/restock updates.

Calum Watt’s Freaky Gothic »

I started talking with Calum Watt a few months ago about collaborating on some of his cool mechanical designs. (see his sites here and here) He’s working on fleshing those plans out for us, but meanwhile he updated a very old sketch I was very interested in using as the Squid Sub pilot/captain.  This cool steampunk-esque figure will be available with the Squid without the coat as the pilot. A separate coated figure will also be available in 1/35 aka 50mm scale. But not only that… the figure is so cool that I’m really considering doing a 1/6 scale (300mm, 12″) version as well. The figure will be 3D sculpted by David Richardson. David’s been collaborating with us on a number of unannounced projects already and does amazing work. (don’t ask… I can’t tell!) You can view David’s site here. No release date yet on the individual figures, but the seated pilot will come with the Squid. Fill out the Notify Me to get info when a preorder is available.

gothic01
Pre-Sculpting Plans^

gothic02
Original sketch circa 2005^

 

Alb-Lab’s T-Zero »

This one has been in the works for a while from Alb-Lab, makers of the Markov Racer. The long sleek T-Zero designed and fabricated by Alberto Longo & Daniele Cattarin is their latest anti-gravity racing endeavor. Featuring resin body and a vacuform canopy. No word yet on decals or PE parts. Expect this one to be available in Fall 2012. Fill out the Notify Me to get info when a preorder is available.

7_dsci0014 dsc_4498

 

FichtenFoo’s Fish Sub II »

Since the Squid Sub is delayed, I still wanted to have a new FichtenFoo steampunk vehicle available for 2012. A while back I saw some cool fish X-rays and one caught my eye. I finally sat down and started the master last week for a new Fish-Shaped Submersible based on the Longnose Butterflyfish. It’s a cool-shaped fish and depending on how squared back I make the fins, (do a Google image search to see how the actual fish looks) will look very sleek and fast. The eyes are set low on the body so this craft will be piloted by someone seated in a prone racing motorcycle position in order to see out the windows. I’ve just gotten the basic body shape done so far so expect more images as I detail it up. It’s slightly smaller than the original Fish Sub I did a few years ago. I do know this kit will use LOTS of photoetch, a potential white metal (pewter?) propeller, clear glass eyes like the Hornethopter, and of course resin and wire. Watch for a preorder later this year. Fill out the Notify Me to get info when a preorder is available.

fishsub2announce fishsub2prog-01

 

Mike Jensen’s Drone »

A loooong time ago I announced we would be kitting Mike Jensen’s “Drone” figure. He sent me the 3D files a few weeks ago, but I didn’t have any renders until now. This will be a 1/6 scale resin figure kit. Approximately 300mm/12in. tall, but no base. No info on the release date yet, but I’ll keep you updated of course when I know more and you can also fill out the Notify Me to get info when a preorder is available.

dronefinal

Final Preproduction Render ^

 

Steampunk Contest Voting »

Voting continues for the Steampunk Costume Contest. Click here to submit your vote by June 30th.

Preordered Item Updates! »

First up is the preorder info. I have several casters working diligently on getting these done so that I can get them out the door and into your hands.
Sasha 1/35:
All 1/35 Sashas are shipping Monday UNLESS they’re paired with a 1/35 Deckhands set and need shipped together.
Sasha 1/32:
Replacement casts shipping by 6.20.2012 to those of you that filled out the replacement form.
Deckhands 1/35: Different caster from Sasha, the 1/35′s and some of the 1/24th’s I believe are shipping on Monday 6.18.2012 to me from the caster. Once I receive them I’ll box and ship immediately as usual.
Deckhands 1/24:
Same caster as 1/35′s, I might have a few next week to start shipping out… not 100% clear there. However I need to wait for the labels to get back from the printer. Wasn’t expecting the resin so soon!

Upcoming Preorders »

Remora 3rd Edition: At caster who will start next edition production next week. I should be able to start a preorder in Early July.
Frankenstein 1st Edition: At caster who will start molding next week. I should be able to start a preorder in Early July.
Chompbot #5 & Chomp Troopers: Both are at different casters and are in production. I should be able to start a preorder in Mid July.
Other upcoming preorder items: Sasha 1/24, Barrio Guy 1/35, Barrio Guy 1/24, Orbship, and Dustbuster.

Restocks! »

We’ve sold out of a LOT of items this past month and will be casting new editions of some of your favorites.
Remora:
We’re still aiming for a July restock of these. Fifty of the 3rd Edition kits will be available for preorder next month.
Sasha 1/35:
We’ve not got the first 100 out the door, but there’s been a lot of interest in her. As soon as I can get the first ones done I’ll start a preorder for the next batch.
Hornethopter: Lots of interest in this little beastie after we sold the last 10 at Wonderfest. I’ll attempt to restock these in August or September…. need to get some of our new scheduled releases out the door first.
FichtenFoo’s Fish-Shaped Submersible: Gave the master back to the caster to start molding for a 6th run! Planning to restock this one early Fall 2012.
Kastor: Same as the Hornethopter… planning to restock this one early Fall 2012.

Fill out the Notify Me to get info when a preorder is available.