Category Archives: Aircraft

Aircraft related products

iMech News 8.26.2014

Drumroll please as we add 5 new items to the store for preorders and one for immediate shipping! Plus restocks and items almost ready for preorders.

Kallamity’s Wachtel»

CoverSample2

The Wachtel bipedal walker by Luca Zampriolo of Kallamity is now up for preorders. This large 1/35 scale walker retails for $150, but for a limited time you can preorder it for $135. Discount ends on 9.13.2014! This kit comes with resin and photoetched parts, plus a pilot figure! Preorder the Wachtel here »

FichtenFoo’s Deaths-Head Hawkmoth »

FichtenFooMoth

Also in production and ready for preorders is FichtenFoo’s (Michael Fichtenmayer) Deaths-Head Hawkmoth. This is the latest in his line of 1/35 scale steampunk fish and insects and features not only resin and photoetch parts, but deluxe waterslide decals and laser-cut wood and natural parchment for the wings! Comes with two female pilots designed by Christophe Desse. Preorder the Deaths-Head Hawkmoth here » Act fast to get a preorder discount and save $10!

Female Pilot [Stand-Alone] »

MothPilot

We commissioned Christophe Desse to design this Female Pilot for our Deaths-Head Hawkmoth with the intent that she can also fit the Hornethopter and Dragonfly pilots seats. While two of her come with the moth kit, we are offering her as a stand-alone piece for use with those kits and anything else your imagination comes up with! Preorder the Female Pilot [Stand Alone] figure here »

Two New Waterslide Decals Sets! »

1-35Warehouse

Two new deluxe waterslide decals sets have been added to the shop for preorders. The first, the Warehouse and Shipping set is designed for use on anything shipping, cargo, or stowage related. Fits perfectly with our Solid, Liquid and Gas container sets!

1-35Flags

The second is our International Nautical Signal Flags set. This is made for 1/35 scale, but can be used for 1/48 through 1/20 if desired. Simply fold the wet decals over string and let set!

1/6 Scale Ninja Blades »

IM24-1-6scaleKunai

I made this Shruiken and Kunai set for use with the TDM Ninja Tortoises I purchased at Wonderfest this spring, but they can be used for any 1/6 scale figure. These photoetched steel throwing stars, knives, and sword blade/guards can be blackened, sharpened and more!

Restocks & More To Come! »
 

The Rook walking tank, our Sea Life photoetch set, and the Red Star 47 are back in stock!

EK Cosmonaut #3 and the Chompbot #5 (2nd Edition) are currently in production, so expect them to hit the shop for preorders in a few weeks!

 

 

The Hopper

Hopper_LRG

ORDER ‘The Hopper’ Here »

The 1/35 scale UNS Hopper HPR719 conceptualized by Calum Alexander Watt and 3D sculpted by Stefano Bernardi is in-stock! This large aircraft is approximately 19cm/7.5in long as you can see in the pattern images below and comes with 3 figures. The Hopper will be on sale for a limited time for $150 USD + Shipping.

iMech News 6.5.2014

So much going on! SO MUCH!!!! It’s been a crazy couple of months with preparing for Wonderfest and failing to complete 2 out of 4 of the planned new releases in time for the show. BUT… these releases are still coming and soon. So let’s get to the good stuff….

WonderFest USA 2014 Wrap-Up »

2014wfbooth

Wonderfest was a few days ago and it was a total blast… what I got to see of it anyway as most of my time was spent behind the table. But I got to see a lot of you that I met last year and meet a bunch of you for the first time. I’ve already purchased my table for next year (moving from #7 to #80) so will get to see everyone again. There was only one iMech product in the show which was pretty disappointing (discussing it with everyone here) so I’m looking into doing a Best iMech award if only in an unofficial fashion. Stay tuned for that!

JerseyFest Aug 1-3 2014 »

I didn’t make it to Jerseyfest last year for a variety of reasons, but this year it’s going to happen. I already booked the hotel and table so it’s on! The Best iMech award is going to happen at that show for sure so get your build-ups done and on the tables in the contest! I’m not sure what the award will be yet… at least a trophy… probably a gift cert for the shop too, but it should be fun regardless to see a bunch of our build-ups in one place! Hope to see you there!

Online iMech Contest? »

And to not leave our VERY large international contingent in the lurch, we’ll be doing an online contest soon as well. This will likely be an end of the year contest, something like a Best iMech build-up of 2014 and will happen in early January. Start your build-ups now, take GOOD photos of the entire process (because that’s awesome for everyone), and details will come.

The Hopper »

hopper_med

Preorders for the Hopper start in less than 12 hours from now! This large and very cool aircraft by Calum Watt and Stefano Bernardi will retail at $160 each + Shipping. Preorders will be eligible for a $10 discount. More on this in our Hopper special post tomorrow! Get on the list and prepare to preorder here.

Bella »

bella_med

Our 1/35 scale Bella, by Pedram Karimfazli, is now available for orders. There are not too many left from this first batch of 50 so I put in an order for another batch which should be here in about 30 days. She’s only $15 for a limited time so get her here.

Sasha in 1/20! »

sasha20_med

Our all-new 1/20 scale Sasha the Welding Girl is also now available! This time she’s in injection plastic and only $20 for a limited time so get yours here.

Project X by Eric Chu »

projectx_lrg

We announced this at Wonderfest 2014 this past weekend and now we’re announcing it to the world! Eric Chu, the concept artist behind the new Battlestar Galactica designs is redesigning a classic spacecraft for us in this fun upcoming 1/72 scale release. More details to come, but get on the NOTIFY ME list here.

More Product Announcements! »

Stay tuned for more upcoming product announcements as we’ve got at least 4 coming up in the next few months!

iMech News 12.10.2013

It’s time for the 2014 Preview!

I’ve been mentioning on our Facebook page that we’ve got many new products in development and that I would soon be showing them off. Well, wait no longer as the announcement time is here! This isn’t everything we’ve got coming up, but will give you a taste of what to expect.

Share This Image »

First up, go to Facebook, Twitter, friends, etc and please share this Promo Image. This will help us spread the word about our upcoming (and existing) products and keep bringing these amazing pieces to life. You can share the promo image from our Facebook page by clicking here. Thanks! We all appreciate the support!

2014previewflyer

Adrian Majkrzak’s Black Moth [Heavy] »

blackmothheavy_lrg

This Heavy Trooper, the first of a 3-person squad, comes from a new collaborative duo of artists joining our roster. Helmet can be displayed in place of the head, or held in the free hand with a full portrait head. Sculpted in 1/8 scale by Mike Kime of Epic Games.

Visit iMech Sh0p Page for the ‘Black Moth [Heavy]‘ here »

Click the ‘Notify Me’ link at the top of the page to get an email when this product is ready for preorders.

Calum Watt’s ‘The Hopper’ »

hopper_lrg

From the concept artist behind our Freaky Gothic figure release! This 1/35 scale flyer comes with 3 figures! (1 standing and 2 pilots seated back-to back) Sculpted by the talented Stefano Bernardi.

Visit iMech Sh0p Page for ‘The Hopper’ here »

Click the ‘Notify Me’ link at the top of the page to get an email when this product is ready for preorders.

Derek Stenning’s EK Cosmonaut Series »

ekpromo2

An all new 3-figure series by Derek Stenning and Gene Campbell, the team-up that brought you Dystopic! This series of <b>1/8 scale</b> figures will be released throughout 2014. Each will have a laser-etched base which will interlock with the other two. The first figure is 95% ready for printing so watch for him in early 2014!

Visit iMech Sh0p Page for EK Cosmonaut #1 here »
Visit iMech Sh0p Page for EK Cosmonaut #2 here »
Visit iMech Sh0p Page for EK Cosmonaut #3 here »

Click the ‘Notify Me’ link at the top of the page to get an email when these products are ready for preorders.

Christophe Desse’s L’Estafette »

estafette_lrg

Another amazing creation by Christophe Desse, designer behind the Red Star 47 and many of our figure sets. This 1/35 scale roadster comes with three figures and two different sets of tires for either mag-rims or photoetched wire rims.

Visit iMech Sh0p Page for the ‘L’Estafette’ here »

Click the ‘Notify Me’ link at the top of the page to get an email when this product is ready for preorders.

Christophe Arnold’s Walrus and Figures »

walrus_lrg

The Walrus is a large beefy APC designed and 3D sculpted by the talented Christophe Arnold. Match this up with Michael Herm’s Rook and other modern military kits for some great diorama possibilities! This large 1/35 scale armored personnel carrier and 4 figure set will be a great addition to any sci-fi or armor modelers collection!

Visit iMech Sh0p Page for the ‘Walrus’ here »

Click the ‘Notify Me’ link at the top of the page to get an email when this product is ready for preorders.

Solid, Liquid, and Gas Containers »

solids_lrg liquids_lrg gasses_lrg

One of the rare “real world” products we’ve developed. Each 1/35 scale set will cost $25 and be available in January 2014.

Visit iMech Sh0p Page for the ‘Solid Container Set’ here »
Visit iMech Sh0p Page for the ‘Liquid Container Set‘ here »
Visit iMech Sh0p Page for the ‘Gasses Container Set‘ here »

Click the ‘Notify Me’ link at the top of the page to get an email when these products are ready for preorders.

The Dragonfly!

dragonfly_lrg-jpg

Don’t blink and don’t bother trying to keep up. Doktor Orpheus Odanata’s Dragonfly is the fastest ornithopter in the skies. Designed and sculpted by FichtenFoo (Michael Fichtenmayer), creator of the Hornethopter, Fantastical Fish-Sub, and Long-Nose Fish Sub, the Dragonfly will add a great touch to any steampunk display. This kit boasts an impressive wingspan of 14 inches (35cm) and a length of 9.5 inches (25cm). Like the Hornethopter, the wings are two layers of photoetched brass with a laser-cut plastic wing-film insert.

Preorder The Dragonfly Here »

Price: $99.00 USD + Shipping.
Estimated Ship Date: 9.1.2013

SAVE $10 On a set of Aviators when you order them with the Dragonfly!

This multimedia kit comes with the following:

  • 40 Resin Parts
  • 1 Pilot Figure
  • 4 Photoetch Frets
  • Glass Eyes
  • Laser-cut wing film
  • Rigging Wire
  • Detailed Instructions

Special thanks to Christophe Desse for the pilot and rear fuselage 3D modeling.

iMech News 7.9.2013

Good news, bad news and ugly news… Thanks to the upcoming San Diego Comicon, everything is delayed for us since our 3D vendor has a lot of big-name rush client work to do for that show. So all of our releases got pushed back as a result and now I need to shift things around a bit to manage it. We also have a bunch of releases in the pipeline that I haven’t announced yet, so since this one will be sooner now, let’s start with it…

FichtenFoo’s Dragonfly [1/35] »

fichtenfoodragonfly-02

The follow-up to the wildly popular Hornethopter (which will be back in stock late summer 2013), the Dragonfly (working title), much like its real-world influence is built for speed. Instead of making the abdomen wider to awkwardly accommodate a pilot, I moved the seating to the rear of the thorax to give it a more streamlined look of an old race car/plane look and feel. The pilot is the same as that used in the Hornethopter and Aviators set in order to reduce production costs (new 3D pilot + 3D print = $$$) Christophe Desse (Red Star/Aviators sculptor) 3D sculpted the thorax based on plans I had sent him, and the rest is hand-sculpted by me (FichtenFoo).

fichtenfoodragonfly-01

Since this was just about ready to go to the caster, I finished up some details and will be sending it to the caster as soon as I finish up the photoetch and instructional design. Look for the Dragonfly to be available by late August 2013. Estimated cost is $99, but that’s an estimate until the casting and photoetch costs come back. The wings will be about 2X the size of the Hornet’s wings area-wise with each wing being a little over 6 inches giving this craft a wingspan of about 14″/35cm. The Dragonfly will also have 15mm half-sphere glass eye lenses, rigging, and laser-cut wing plastic.

fichtenfoodragonfly-03

Preorder Delays »

A few weeks ago I wrote: “Currently on the site we have the Remora and Frankenstein up for preorder. Since the caster for these was also sidetracked by Wonderfest USA and playing catch-up, they’re slightly behind. Thanks for your patience and support with these!” And things haven’t gotten better… in fact they’ve gotten more behind. The issue is that both of these are using the same caster and both needed remolded. He’s just one guy and has had some health issues lately. I should have at least the Remoras on July 27, 2013 he says and Frankenstein soon after. I’m not exactly thrilled about delaying these any more than you are, but it unfortunately cannot be helped. Rest assured, they are coming.

Other preorder items, such as the upcoming Steam Car and Dragonfly will be handled by a faster casting firm so will not suffer the same delays.

Again, I’m terribly sorry for these delays. It’s not cool and not something I ever want to happen and have been striving to overcome since I started this company. Please be patient and they’ll be on their way as soon as possible.

Ian McQue’s Waldo Preorder!

Ian McQue’s Waldo, sculpted by Michael Fichtenmayer (aka FichtenFoo) is now available for preorders! This kit sports a fantastic laser-cut wood deck and plastic windows, full photoetch wheelhouse (2 large sheets of etch for this and other details), waterslide decals, pilot figure, and hollow hull with full engine visible from the deck grating and from the bottom of the hull’s thruster opening. Pics, art, instructions, etc on the shop page here.

PREORDER The Waldo Here »

Price: $125 + Shipping
Shipping Estimate: Late May 2013

Save $5 on a set of Ian McQue’s Deckhands (1/35) when you order them with the Waldo.*
(*while supplies last)

 

Also Available for PREORDER:

Ian McQue’s Remora 4th Ed!

remoracover

Ian McQue’s Remora’s 4th edition is also available for PREORDERS. Start your fleet now!

PREORDER the Ramora 4th Ed Here »

Price: $150+ Shipping
Shipping Estimate: June 2013

 

Ian McQue’s Sky Mark Buoy

buoyart-01

Ian McQue’s Sky Mark buoys are also available. These buoys will look great guiding your other Ian McQue airships into port.

ORDER the Sky Mark Here »

Price: $60 each (or two for $110) + Shipping
In-Stock Now!

iMech News 2.11.2013

Hi. How are you? Good? Awesome. Now that that’s over, let’s get onto the news! This time: SASHA’S BACK! Yup! Also finished pics of FichtenFoo’s Sky Marks and Luca Z’s Kastor build-ups as well as a Rook preorder update.

Sasha The Welding Girl in 1/35 and 1/32! »

sasha35_lrg

Sasha the Welding Girl is back in 1/35 and 1/32 scale looking better than ever thanks to a new caster for the project. Get her while she lasts!

Order Sasha in 3 Scales!

1/35 Scale Sasha »
1/32 Scale Sasha »
1/24 Scale Sasha »

Ian McQue’s Sky Mark »

I finished up these Sky Mark build-ups a month or so ago, but finally photographed them this week. They look great alongside of the Remora. Check out my blog-post at FichtenFoo and order your Sky Marks here.

Kallamity’s Kastor »

Luca Zampriolo sent us the final and progress images of his Kastor build-up. I love how he used putty to create the rough-cast texture. The Kastor is back in stock so order your Kastor here.

Michael Herm’s Rook »

rook_lrg

The Rook and Pawn Brigade masters have been printed and are at the caster. As soon as they send me the quote I can get the final price together and start preorders. I should be able to start preorders this Friday, Feb 15th at noon EST if all goes well. If not, then Tuesday, Feb 19th at noon EST will be our make-up date.

 

 

iMech News 1.14.2013

Hi everyone. So it’s been about 1 year now since our first official Industria Mechanika product, Ian McQue’s Remora started shipping out. Since then we’ve done two more editions of it and a LOT of other products. Thank you all again for your support. I know the economy is crap right now, but our collaborators, vendors and I appreciate your business and loyalty as many of you are repeat customers, some of whom have bought every kit we’ve released. I know our release schedule is… random at best. I really try to keep the schedule on track, but with different collaborators (with full-time jobs aside from this), casters and vendors all contributing to the same products, plus with 30+ different products in production at any given time, that can be difficult. The holiday season has wreaked havok on it as well, but we adapt and carry on! So without further adieu, the news…

Michael Herm’s Rook »

Sorry, sorry, sorry!!!! This has been pushed back a little more, so for those of your emailing me, concerned that you missed it (about 50 of you so far, LOL!) no worries! I reset the preorder start date to 2.15.2013 (Be sure to click the notify link on the order page to get an email when it’s ready and add our sales@ address to your NOT SPAM filter.) and that should be the last reset.

rook2

There was a few items that needed last minute tweaks noticed by the 3D printer… parts that were too thin to cast properly. I love that they check our work to help ensure a great end product! We’re also working on finalizing the box art and I should be able to start on the instructions this week as well. What I don’t want to do is start a preorder-period that ends up extended with production delays. That’s happened a few times and it’s a hassle for you guys. Better we have a good idea on the actual release date and do the preorder start a few weeks (not months) before that. Again, sorry for the delays, but this will be an amazing kit. So to summarize:

Rook/Pawn Preorder Start Date: No later than 2.15.2013
Rook/Pawn Shipping Date: No later than 3.15.2013
Rook Price: TBD (depends on casting/print costs)
Pawn Price: TBD (depends on casting/print costs)

Ian McQue’s Waldo First Look »

I’ve been hinting at this one for a while now and finally you can see what’s coming up!

waldo-00

The 1/35 scale Waldo is a smaller airship than the Remora with a hull length of about 14cm/5.5in and width of 5.5cm/3in. It’s more of a tug/maintenance craft than a hauler, but will feature a cargo rack on the transom that you can fill up with all manner of storage. This kit will be a truly multimedia experience with a laser-cut wood deck (prototype seen below), photoetch wheelhouse/roof and details, resin parts, decals, and various threads and wires.

I (FichtenFoo) am working on the master currently which is why I haven’t done a paint-up of many of our recent releases yet. The Waldo is about 60% done I think. I had the hull 3D-printed without details so that I can add those myself. I’m doing it this way mainly because it’s a difficult hull shape and I wanted the laser-cut deck to fit nicely. I also needed the hull to be hollow so that I can add a full engine inside of it since you should be able to see through deck grating, all the way through the ship creating a really nice layered effect.

waldo-01

I expect to be finished with the master in February at which time it’ll go immediately into production. Not sure of the final price yet as there’s a lot of components to price as you can imagine. Hopefully the Waldo will be shipping some time in May. Watch for it to be added to the store for notifications soon!

Red Star 47 Print Materials »

The Red Star’s print materials are going to the printer today and will be back early next week in plenty of time for the release. Here’s a preview and be sure to preorder yours here »

rs-boxart rs-insts rs-figs

 

iMech News 9.26.2012

News! News! News!!! Lots of news today, but all good! Chompbot Sale, Ian McQue’s Sky Mark, Christophe Desse’s Aviators and Submariners, Dawn of the Apocalypse, FichtenFoo’s Long Nose Fish Sub, and Miguel Lopez Dustbuster!

Chompbot #5 Preorder Event

Don’t miss out on saving $10 on the Chompbot #5 and Chomp Troopers! Sale ends Friday at Midnight! (EST) Also check out my build-up pics of the Chompbot pre-release sample parts I’ve received so far from the casters.

ffcb-08

 

Ian McQue Sky Mark Print Materials and Art!

The Sky Mark production is coming along nice and quick! I’ll have 50 (out of 100 first ed) kits in a few weeks. No preorder for these so first come first served when the sale page starts. Meanwhile, enjoy this new Ian McQue art for the Sky Mark buoy as well as the instructions/box label pics.

buoyart-01

 

Dustbuster Print Materials

Dustbuster coming in another month or so! Meanwhile enjoy these packaging pics:

dbcover dbinstructions

 

Christophe Desse’s Aviators

Coming in about 30 days, Chistophe Desse’s Aviators! These 4 Steampunk inspired figures are sold as a set. The seated pilot will also be included with the Hornethopter’s next edition (also coming soon!) to replace the old pilot.

aviators-00 aviators-01

 

Christophe Desse’s Submariners

This maritime quartet will also be sold as a set and is the perfect accessory for our submersible releases! Set includes two swimmers and two “land-lubbers”. Available in about 60 days!

swimmers-01 swimmers-02 swimmers-03 swimmers-04

 

Longnose Fish Submersible Pilot Print

And the inspiration behind the Submariners is of course the Long Nose Fish Sub pilot that Christophe Desse also did for us. Here’s a few shots of the pilot print. Christophe is also working on a seated pilot that can be used for the original Fish Sub as well!

fishsub2pilot-02 fishsub2pilot-print

 

Dawn of the Apocalypse!

B2_box_cen

Finally… Announcing Dawn of the Apocalypse! These figures were designed and produced by us at Industria Mechanika for Dark World Creations. Check out the sexy and zombified creations below. More figures and post apocalyptic car kit mod sets on the way! The girls Ginger and Krystal were sculpted by David Richardson. Zombies Jared and Jessica were sculpted by Pedram Karimfazli. Show these guys some love and get yourself some fantastic 1/24 scale End of Civilization goodness!

 

Preordered Item Updates! »

First up is the preorder info. I have several casters working diligently on getting these done so that I can get them out the door and into your hands.
Ian McQue’s Remora 3rd Ed:  All Units Shipped!!!
Deckhands 1/35: All preordered units in-stock and shipping now!
Deckhands 1/24:
Waiting on casts. Once I receive them I’ll box and ship immediately as usual.
Sasha 1/24:
Available now!
Barrio 1/24:
Avialable now!
Barrio 1/35:
Waiting on casts. Once I receive them I’ll box and ship immediately as usual.
Chompbot #5, Troopers, Pilots: Waiting on casts. Once I receive them I’ll box and ship immediately as usual.
Orb Ship: Waiting on casts. Once I receive them I’ll box and ship immediately as usual.


Upcoming Preorders »

Upcoming preorder items: Dystopic, Dustbuster, and Ian McQue’s Sky Mark.

 

Restocks! »

Sasha 1/35, 1/32: Next batch coming soon for preorder!
Hornethopter: Lots of interest in this little beastie after we sold the last 10 at Wonderfest. I’ll attempt to restock these in October…. need to get some of our new scheduled releases out the door first and get the new pilots and pilot set cast.
FichtenFoo’s Fish-Shaped Submersible: Available Now!
Kastor: Same as the Hornethopter… planning to restock this one early December 2012.

Fill out the Notify Me to get info when a preorder is available for preorders.