Category Archives: Post Apocalyptic

iMech News 7.22.2014

So much to talk about this month! You might have noticed (because I’ve been promoting it!) our new look, especially our completely redesigned store. Also new and upcoming mecha designs by Christophe Desse and Kallamity, disappointing news about iMech going to JerseyFest, and more!

About Our New Look »

For the past 10 days or so I’ve been redesigning the iMech Shop and Blog. (The forum is next!) This update adds a lot of new functionality and improvements to the store, both in look and function. It should be a better shopping experience for everyone with far less bugs than the old shop. The trade-off however is that the store needed to be done from scratch. That means all user accounts for the old store are not accessible in the new store, but so are the hassles of lost password retrieval. The accounts and orders still exist in the old store which I’m keeping for now in an undisclosed location for taking care of existing preorders, but all new accounts and orders will go through the new and improved shop.

AnnouncementLargeWide

We hope you enjoy the new site! It’ll make adding an upcoming, totally secret product line that’s in development a LOT easier. ;-) News on that in a few months when it’s further along.

Subscribe To Our Newsletter! »

For now, to receive product preorder and restock notifications, sign up for our newsletter either by entering your email in the shop footer or by making a new shop account.

KRBL-TR-47 [Krabbel-Tiere] »

WebKRABBELlarge

With the new look comes a new product: Christophe Desse’s upcoming KRBL-TR-47 scout walker! Coming later in 2014 from the Red Star 47 and Her Majesty’s Estafette. Note: The figures shown are from our Ground Crew and Flight Ready figure sets. KRBL-TR Scout Walker will come with new figures for driver, and turret, but the KRBL-TR will work many of our figure sets. Final product
may vary.

Kallamity News »

Briegel

It looks as if Kallamity‘s Briegel is going to be coming to the iMech store after all! So watch this space and subscribe to our newsletter for more news and details about the Briegel!

09a

Kastor

We have a few Kastor Hovertank kits back in stock. Get them while they last!

Kastor_LRG

Hopper Decals »

HopperDecalSample2

We are now offering the decals that come with Calum Watt’s Hopper as a stand-alone product. They’re cool enough to use on a variety of project ideas, or to associate another build-up with your Hopper via markings.

SavageForged Mini’s Black Moth Heavy Build-Up »

Check out this fantastic paint-up of our Black Moth [Heavy] by SavageForged Minis! He’s selling it so contact him for more details!

Untitled-4

About JerseyFest »

I really wanted to make it to JerseyFest this year, purchased a table, made reservations, but it just wasn’t in the cards. Most don’t realize that I’m a very small business and as such almost everything that needs done is done by me. It piles up. Now factor in that Wonderfest and a few resellers depleted most of my stock that I would had been taking to JF and well… I could either spend the money and drive 6 hours to go to JF and stand behind a table apologizing to everyone, telling them to preorder on our website, or I could do that here and on Facebook and use the saved time and money to do some amazing things. This website redesign is just one of many things I had planned for the summer that I am able to work on now. More coolness is on the way!

But I’m not “a monster” who’s going to leave the attendees at JF hanging. Prove that you were there and I’ll give you free shipping on orders placed after the show between 8.3 and 8.8.2014. The “Best of iMech” trophy will also be awarded there still, just not judged by me as planned. No worries though, the judges are awesome!

iMech News 2.25.2014

This month we talk about delays, more delays and some more delays… eventually. For whatever reason, for things out of my control, seemingly everything has been suffering from some manner of delay recently. This will change shortly however as I have 4 new products printed and ready for the caster. Plus more news….

The Walrus and Porpoise Assault Troopers »

walrus_lrg porpoise_lrg

It’s only been up in the store for a week or two now for preorders, but I just got word that the Walrus and Porpoise kits are either already in the mail to me or will be in the next few days. Regardless, they’re done so we’re ahead of schedule!

Preorder the Walrus APC ($130) and the accompanying Porpoise Assault Troops ($35) together and save $5!

Black Moth Preorder Date »

blackmothheavy_lrg

Since the Walrus is done, the caster is moving on to the Black Moth [Heavy] next. I asked them to delay casting a few weeks so everything doesn’t come to me (and you) at once (been there, done that, everyone hated it) so I’ll begin preorders for the Black Moth [Heavy] 1:8 scale figure on March 7th 2014. Get on the notification list here »

1/35 Sea Birds »

seabirds_lrg

Sea Birds are being cast as we speak. They will be $15 for a set of 8 birds, 2 Pelicans and 2x each of the gulls, and most will have photoetch feet and/or legs. Click here to preorder!

Her Majesty’s Estafette »

estafette_lrg

Always something delaying the Her Majesty’s Estafette kit, but we’re finally in the home stretch. The caster will have the last of the parts today (was missing the headlamp lens) and production will begin in a few weeks if it hasn’t already. Stay tuned for the final price and preorder date some time in March.

Restocks »

I’ll have some Chrononauts and Rooks back in-stock in a few weeks for those that have preordered and are waiting for the next batch, or for those that are waiting for it to be here. Will have the pilots for the last of the current Red Star 47 batch soon as well and will be able to ship those to everyone who’s been waiting.

Remora, Frankenstein, and Other Delays »

The caster for the Remora and Frankenstein has been having some random issues and set-backs. The Remoras should be in-hand this weekend however and he’ll start Frankenstein’s next batch right after it. He’s been working alone and with a new rubber (which he says will mean better castings) which has been the main cause of the delays. So it’s for a good reason I think. Better is always… better… even if it’s a little late.

Also been waiting on the valve wheels for the Gasses set so I can start shipping those sets out. They were not added to the original fret so it’s caused some delays. I’ll have them in 2 weeks. Thanks for your patience!

Amazing Figure Modeler #56 »

afm56

And ending on a high note, check out Amazing Figure Modeler #56 not only for their typically awesome build-ups and articles, (seriously… every issue is gold!) but because there’s a 7-page interview with me about Industria Mechanika and our way of doing things.

Thanks for your support!

iMech News 1.7.2014

Happy New Year everyone! Here’s what’s going on now:

New Years Sale! »

Select items are on sale to ring in the New Year! Sale ends for most of these items on 2.5.2014 so act fast! Click here to view sale items.

Container Sets Ready + $10 Coupon! »

The Solid, Liquid and Gas container sets are the only “real world” products we’ve developed so far. Each 1/35 scale set costs $22. Use coupon code 3SLG2014 at checkout to save $10 USD on any 3 container sets. Expires 1/5/2015. Limit one use per customer. Coupon code MUST be used at checkout… not valid for refunds if code is forgotten. Only valid on container sets.

solids_lrg liquids_lrg gasses_lrg

Visit iMech Sh0p Page for the ‘Solid Container Set’ here »
Visit iMech Sh0p Page for the ‘Liquid Container Set‘ here »
Visit iMech Sh0p Page for the ‘Gasses Container Set‘ here »

 

The Walrus and Porpoise »

Christophe Arnolds Walrus APC and Porpoise Shock Troopers will be available for preorder around the end of the month. Here’s the box art and printed master photos for each set. Get on the notification lists for each by clicking the links below!

The Walrus APC »
Porpoise Shock Troopers »

 

Rooks Are Back!

rook_lrg

The Rook: This amazingly detailed Rook walking tank is available for orders today! Click here to order your copy.

 

Preorder ETAs »

Chrononaut + T-Rex Head: ETA: 30 Days
Remora: ETA: 25 Days
Frankenstein: ETA: 45 Days
Deckhands: ETA: 7 Days

iMech News 12.10.2013

It’s time for the 2014 Preview!

I’ve been mentioning on our Facebook page that we’ve got many new products in development and that I would soon be showing them off. Well, wait no longer as the announcement time is here! This isn’t everything we’ve got coming up, but will give you a taste of what to expect.

Share This Image »

First up, go to Facebook, Twitter, friends, etc and please share this Promo Image. This will help us spread the word about our upcoming (and existing) products and keep bringing these amazing pieces to life. You can share the promo image from our Facebook page by clicking here. Thanks! We all appreciate the support!

2014previewflyer

Adrian Majkrzak’s Black Moth [Heavy] »

blackmothheavy_lrg

This Heavy Trooper, the first of a 3-person squad, comes from a new collaborative duo of artists joining our roster. Helmet can be displayed in place of the head, or held in the free hand with a full portrait head. Sculpted in 1/8 scale by Mike Kime of Epic Games.

Visit iMech Sh0p Page for the ‘Black Moth [Heavy]‘ here »

Click the ‘Notify Me’ link at the top of the page to get an email when this product is ready for preorders.

Calum Watt’s ‘The Hopper’ »

hopper_lrg

From the concept artist behind our Freaky Gothic figure release! This 1/35 scale flyer comes with 3 figures! (1 standing and 2 pilots seated back-to back) Sculpted by the talented Stefano Bernardi.

Visit iMech Sh0p Page for ‘The Hopper’ here »

Click the ‘Notify Me’ link at the top of the page to get an email when this product is ready for preorders.

Derek Stenning’s EK Cosmonaut Series »

ekpromo2

An all new 3-figure series by Derek Stenning and Gene Campbell, the team-up that brought you Dystopic! This series of <b>1/8 scale</b> figures will be released throughout 2014. Each will have a laser-etched base which will interlock with the other two. The first figure is 95% ready for printing so watch for him in early 2014!

Visit iMech Sh0p Page for EK Cosmonaut #1 here »
Visit iMech Sh0p Page for EK Cosmonaut #2 here »
Visit iMech Sh0p Page for EK Cosmonaut #3 here »

Click the ‘Notify Me’ link at the top of the page to get an email when these products are ready for preorders.

Christophe Desse’s L’Estafette »

estafette_lrg

Another amazing creation by Christophe Desse, designer behind the Red Star 47 and many of our figure sets. This 1/35 scale roadster comes with three figures and two different sets of tires for either mag-rims or photoetched wire rims.

Visit iMech Sh0p Page for the ‘L’Estafette’ here »

Click the ‘Notify Me’ link at the top of the page to get an email when this product is ready for preorders.

Christophe Arnold’s Walrus and Figures »

walrus_lrg

The Walrus is a large beefy APC designed and 3D sculpted by the talented Christophe Arnold. Match this up with Michael Herm’s Rook and other modern military kits for some great diorama possibilities! This large 1/35 scale armored personnel carrier and 4 figure set will be a great addition to any sci-fi or armor modelers collection!

Visit iMech Sh0p Page for the ‘Walrus’ here »

Click the ‘Notify Me’ link at the top of the page to get an email when this product is ready for preorders.

Solid, Liquid, and Gas Containers »

solids_lrg liquids_lrg gasses_lrg

One of the rare “real world” products we’ve developed. Each 1/35 scale set will cost $25 and be available in January 2014.

Visit iMech Sh0p Page for the ‘Solid Container Set’ here »
Visit iMech Sh0p Page for the ‘Liquid Container Set‘ here »
Visit iMech Sh0p Page for the ‘Gasses Container Set‘ here »

Click the ‘Notify Me’ link at the top of the page to get an email when these products are ready for preorders.

iMech News 9.18.2013

Been a while since the last update so let’s get right to it with preorder updates, build-up pics, and finally some new product announcements!

The Walrus by Christophe Arnold »

walrusannouncement

First up we want to introduce the Walrus and a related 4-figure set designed and 3D sculpted by the talented Christophe Arnold. This 1:35 scale APC and Figure set will be available late 2013/early 2014. Match this up with Michael Herm’s Rook and other modern military kits for some great diorama possibilities! Christophe is still working on the 4th figure, but we wanted to show this off sooner than later. Price/Release Date TBD.

Click here to get on the Notify Me list for the Walrus!

Solid, Liquid, & Gas Container Sets »

Something missing from our line-up is some cool modern accessories to go with kits like the Ian McQue airships, Dustbuster, Walrus, and Rook. We enlisted Nate Clowar, the 3D artist behind the Dustbuster to create three different container sets based on Solids, Liquids, and Gasses. Mix elements from these three for your sci-fi and modern dioramas. Also worth mentioning is this is the first time we’ve done something based on reproducing real-life objects. We feel so weird doing real stuff, but in a good way as these work great for so many of our products! Price TBD. Release Date: October 2013.

solids

Click here to get on the Notify Me list for Solids!

liquids

Click here to get on the Notify Me list for the Liquids!

gasses

Click here to get on the Notify Me list for the Gasses!

FichtenFoo’s New iMech Build-ups »

The Dragonfly

fichtenfoo-im-dragonfly-00

I recently finished up two of our iMech releases. The first is my 1/35 Dragonfly. As biased as I am having designed it, the kit was a joy to work on. It’s large, but not in volume thanks to the large thin wings. A Step-By-Step can be found on my FichtenFoo blog here.

Order your Dragonfly here »

 

The Centurion

fichtenfoo-imech-centu-01

I also *finally* finished up one of my two Fabio M. Silva Centurion builds. I was waiting on LEDs and resistors, then got side-tracked with other work and projects. There wasn’t much to do to finish this up… just some soldering of the LEDs and inserting them and the small wires behind the eyes. A Step-By-Step can be found on my FichtenFoo blog here.

Order your Centurion bust here »

We’re Keeping You Updated With Our:

PreorderUpdate

Shipping by early next week: Manchu’s Steam Car, Dr. Torque, and The Rook 2nd Ed part 2.

manchusteamcar_lrg

Dustbuster Sale and Build-Up Images!

Since we’re finally seeing (and doing) some build-ups of the Dustbuster we’re having a sale on it! For a limited time (3.18.2013 to be exact) you pay only $90 for the kit which retails for $99.

Click here to get the 1/35 Dustbuster kit!

dbcover

Dustbuster Build-up by FichtenFoo »

Here’s some shots of the FichtenFoo (Michael Fichtenmayer) Dustbuster build-up along with a short SBS on how I achieved the dusty, muddy finish.

fichtenfoo-dustbuster-14

Dustbuster Build-up by John Jenkins »

John Jenkins posted shots of his great Dustbuster build-up on Facebook. With his permission I’m reposting them here for you to see.

225401_532619940093931_1446992332_n

 

Click here to get the 1/35 Dustbuster kit!

 

 

iMech News 2.11.2013

Hi. How are you? Good? Awesome. Now that that’s over, let’s get onto the news! This time: SASHA’S BACK! Yup! Also finished pics of FichtenFoo’s Sky Marks and Luca Z’s Kastor build-ups as well as a Rook preorder update.

Sasha The Welding Girl in 1/35 and 1/32! »

sasha35_lrg

Sasha the Welding Girl is back in 1/35 and 1/32 scale looking better than ever thanks to a new caster for the project. Get her while she lasts!

Order Sasha in 3 Scales!

1/35 Scale Sasha »
1/32 Scale Sasha »
1/24 Scale Sasha »

Ian McQue’s Sky Mark »

I finished up these Sky Mark build-ups a month or so ago, but finally photographed them this week. They look great alongside of the Remora. Check out my blog-post at FichtenFoo and order your Sky Marks here.

Kallamity’s Kastor »

Luca Zampriolo sent us the final and progress images of his Kastor build-up. I love how he used putty to create the rough-cast texture. The Kastor is back in stock so order your Kastor here.

Michael Herm’s Rook »

rook_lrg

The Rook and Pawn Brigade masters have been printed and are at the caster. As soon as they send me the quote I can get the final price together and start preorders. I should be able to start preorders this Friday, Feb 15th at noon EST if all goes well. If not, then Tuesday, Feb 19th at noon EST will be our make-up date.

 

 

iMech News 1.14.2013

Hi everyone. So it’s been about 1 year now since our first official Industria Mechanika product, Ian McQue’s Remora started shipping out. Since then we’ve done two more editions of it and a LOT of other products. Thank you all again for your support. I know the economy is crap right now, but our collaborators, vendors and I appreciate your business and loyalty as many of you are repeat customers, some of whom have bought every kit we’ve released. I know our release schedule is… random at best. I really try to keep the schedule on track, but with different collaborators (with full-time jobs aside from this), casters and vendors all contributing to the same products, plus with 30+ different products in production at any given time, that can be difficult. The holiday season has wreaked havok on it as well, but we adapt and carry on! So without further adieu, the news…

Michael Herm’s Rook »

Sorry, sorry, sorry!!!! This has been pushed back a little more, so for those of your emailing me, concerned that you missed it (about 50 of you so far, LOL!) no worries! I reset the preorder start date to 2.15.2013 (Be sure to click the notify link on the order page to get an email when it’s ready and add our sales@ address to your NOT SPAM filter.) and that should be the last reset.

rook2

There was a few items that needed last minute tweaks noticed by the 3D printer… parts that were too thin to cast properly. I love that they check our work to help ensure a great end product! We’re also working on finalizing the box art and I should be able to start on the instructions this week as well. What I don’t want to do is start a preorder-period that ends up extended with production delays. That’s happened a few times and it’s a hassle for you guys. Better we have a good idea on the actual release date and do the preorder start a few weeks (not months) before that. Again, sorry for the delays, but this will be an amazing kit. So to summarize:

Rook/Pawn Preorder Start Date: No later than 2.15.2013
Rook/Pawn Shipping Date: No later than 3.15.2013
Rook Price: TBD (depends on casting/print costs)
Pawn Price: TBD (depends on casting/print costs)

Ian McQue’s Waldo First Look »

I’ve been hinting at this one for a while now and finally you can see what’s coming up!

waldo-00

The 1/35 scale Waldo is a smaller airship than the Remora with a hull length of about 14cm/5.5in and width of 5.5cm/3in. It’s more of a tug/maintenance craft than a hauler, but will feature a cargo rack on the transom that you can fill up with all manner of storage. This kit will be a truly multimedia experience with a laser-cut wood deck (prototype seen below), photoetch wheelhouse/roof and details, resin parts, decals, and various threads and wires.

I (FichtenFoo) am working on the master currently which is why I haven’t done a paint-up of many of our recent releases yet. The Waldo is about 60% done I think. I had the hull 3D-printed without details so that I can add those myself. I’m doing it this way mainly because it’s a difficult hull shape and I wanted the laser-cut deck to fit nicely. I also needed the hull to be hollow so that I can add a full engine inside of it since you should be able to see through deck grating, all the way through the ship creating a really nice layered effect.

waldo-01

I expect to be finished with the master in February at which time it’ll go immediately into production. Not sure of the final price yet as there’s a lot of components to price as you can imagine. Hopefully the Waldo will be shipping some time in May. Watch for it to be added to the store for notifications soon!

Red Star 47 Print Materials »

The Red Star’s print materials are going to the printer today and will be back early next week in plenty of time for the release. Here’s a preview and be sure to preorder yours here »

rs-boxart rs-insts rs-figs

 

iMech News 9.26.2012

News! News! News!!! Lots of news today, but all good! Chompbot Sale, Ian McQue’s Sky Mark, Christophe Desse’s Aviators and Submariners, Dawn of the Apocalypse, FichtenFoo’s Long Nose Fish Sub, and Miguel Lopez Dustbuster!

Chompbot #5 Preorder Event

Don’t miss out on saving $10 on the Chompbot #5 and Chomp Troopers! Sale ends Friday at Midnight! (EST) Also check out my build-up pics of the Chompbot pre-release sample parts I’ve received so far from the casters.

ffcb-08

 

Ian McQue Sky Mark Print Materials and Art!

The Sky Mark production is coming along nice and quick! I’ll have 50 (out of 100 first ed) kits in a few weeks. No preorder for these so first come first served when the sale page starts. Meanwhile, enjoy this new Ian McQue art for the Sky Mark buoy as well as the instructions/box label pics.

buoyart-01

 

Dustbuster Print Materials

Dustbuster coming in another month or so! Meanwhile enjoy these packaging pics:

dbcover dbinstructions

 

Christophe Desse’s Aviators

Coming in about 30 days, Chistophe Desse’s Aviators! These 4 Steampunk inspired figures are sold as a set. The seated pilot will also be included with the Hornethopter’s next edition (also coming soon!) to replace the old pilot.

aviators-00 aviators-01

 

Christophe Desse’s Submariners

This maritime quartet will also be sold as a set and is the perfect accessory for our submersible releases! Set includes two swimmers and two “land-lubbers”. Available in about 60 days!

swimmers-01 swimmers-02 swimmers-03 swimmers-04

 

Longnose Fish Submersible Pilot Print

And the inspiration behind the Submariners is of course the Long Nose Fish Sub pilot that Christophe Desse also did for us. Here’s a few shots of the pilot print. Christophe is also working on a seated pilot that can be used for the original Fish Sub as well!

fishsub2pilot-02 fishsub2pilot-print

 

Dawn of the Apocalypse!

B2_box_cen

Finally… Announcing Dawn of the Apocalypse! These figures were designed and produced by us at Industria Mechanika for Dark World Creations. Check out the sexy and zombified creations below. More figures and post apocalyptic car kit mod sets on the way! The girls Ginger and Krystal were sculpted by David Richardson. Zombies Jared and Jessica were sculpted by Pedram Karimfazli. Show these guys some love and get yourself some fantastic 1/24 scale End of Civilization goodness!

 

Preordered Item Updates! »

First up is the preorder info. I have several casters working diligently on getting these done so that I can get them out the door and into your hands.
Ian McQue’s Remora 3rd Ed:  All Units Shipped!!!
Deckhands 1/35: All preordered units in-stock and shipping now!
Deckhands 1/24:
Waiting on casts. Once I receive them I’ll box and ship immediately as usual.
Sasha 1/24:
Available now!
Barrio 1/24:
Avialable now!
Barrio 1/35:
Waiting on casts. Once I receive them I’ll box and ship immediately as usual.
Chompbot #5, Troopers, Pilots: Waiting on casts. Once I receive them I’ll box and ship immediately as usual.
Orb Ship: Waiting on casts. Once I receive them I’ll box and ship immediately as usual.


Upcoming Preorders »

Upcoming preorder items: Dystopic, Dustbuster, and Ian McQue’s Sky Mark.

 

Restocks! »

Sasha 1/35, 1/32: Next batch coming soon for preorder!
Hornethopter: Lots of interest in this little beastie after we sold the last 10 at Wonderfest. I’ll attempt to restock these in October…. need to get some of our new scheduled releases out the door first and get the new pilots and pilot set cast.
FichtenFoo’s Fish-Shaped Submersible: Available Now!
Kastor: Same as the Hornethopter… planning to restock this one early December 2012.

Fill out the Notify Me to get info when a preorder is available for preorders.

iMech News 7.29.2012

Lots of news to go over today as I missed showing off a few things last week.

Frankenstein Printwork »

The artwork for Adrian Smith’s Frankenstein‘s box and instructions are at the printer and thankfully will be here in time for the 8/7/2012 release date. Frankenstein sports an awesome 49 resin parts, chain and real chain mail! Check out the samples below and click here to preorder.

fboxcoverl finstcoverl finstinsidel

 

New Hornethopter Pilots Set »

First I must apologize to Christophe Desse for not posting these sooner! He redesigned the Hornethopter pilots based loosely on my original hand-sculpts for the first few editions. The seated pilot will be available with the next release of the Hornethopter, while all four will be available as a separate set. No idea on price yet, but expect them in the store within 6-8 weeks.

hornet1 hornet3 hornet2 hornet4

 

Fish Sub Pilot Beginnings »

Christophe Desse is also busy designing a pilots set for the original and upcoming MkII Fish-Shaped submersibles. The next edition (6th) of the Mk I may not come with the figure, (as it won’t be ready in time for the next edition) but the first edition of the Mk II will and a sub pilots set including the seated pilots (for those that purchased the first 5 editions of the Mk I sub) will be available for everyone around the time of the Mk II release. Below you can see the base figure. Other pilot versions will have an old-timey tank-top swim suit style, hats, breathers, etc…

fisht1

 

Derek Stenning’s Dystopic Update »

Not much new to show here, but I wanted to let everyone know that Dystopic is coming soon! The print will be done in 4-5 days I’m told, then clean-up, then onto production. We’re still looking at October for a preorder/release. Below you can see how the parts-breakup will look. Each color is a separate printed kit part.

cuts

 

Futuristic Loader Update »

A few new images of the Futuristic loader. I brought up that there was no leg support for this heavy lifter so the team collaborated and came up with this great-looking result. I’ve added it to the calendar as a tentative November preorder/release.

loader3 loader4

 

Release Calendar »

Please see here for the updated release calendar.

Preordered Item Updates! »

First up is the preorder info. I have several casters working diligently on getting these done so that I can get them out the door and into your hands.
Adrian Smith’s Frankenstein:
Shipping ~August 7th Preorder Frankenstein here »
Ian McQue’s Remora 3rd Ed: Shipping ~August 7th Preorder Remora here »
Deckhands 1/35: The box of casts was lost in the mail almost 6 weeks ago. We’re working on the next batch as fast as we can. Once I receive them I’ll box and ship immediately as usual.
Deckhands 1/24:
Waiting on casts Once I receive them I’ll box and ship immediately as usual.

Upcoming Preorders »

Upcoming preorder items: Chompbot #5, Chomp Troopers, Sasha 1/24, Barrio Guy 1/35, Barrio Guy 1/24, Orbship, and Dustbuster.

Restocks! »

Sasha 1/35: Next batch coming soon for preorder!
Hornethopter: Lots of interest in this little beastie after we sold the last 10 at Wonderfest. I’ll attempt to restock these in August or September…. need to get some of our new scheduled releases out the door first.
FichtenFoo’s Fish-Shaped Submersible: Gave the master back to the caster to start molding for a 6th run! Planning to restock this one early Fall 2012.
Kastor: Same as the Hornethopter… planning to restock this one early Fall 2012.

Fill out the Notify Me to get info when a preorder is available.