Look for me (Michael Fichtenmayer aka FichtenFoo) at the Industria Mechanika dealer table (Table 7). Jason “Roboterkampf” Eaton will be helping me out Saturday morning for an hour before his demo at 10am so be sure to check out his gig!

When I return (and during the event) you can get a sneak peak at our next release (a 1/4 scale bust) which was supposed to be ready for the show, but due to quality assurance it wasn’t. Better done right than done fast though!

Thanks!

Ian McQue’s Waldo, sculpted by Michael Fichtenmayer (aka FichtenFoo) is now available for preorders! This kit sports a fantastic laser-cut wood deck and plastic windows, full photoetch wheelhouse (2 large sheets of etch for this and other details), waterslide decals, pilot figure, and hollow hull with full engine visible from the deck grating and from the bottom of the hull’s thruster opening. Pics, art, instructions, etc on the shop page here.

PREORDER The Waldo Here »

Price: $125 + Shipping
Shipping Estimate: Late May 2013

Save $5 on a set of Ian McQue’s Deckhands (1/35) when you order them with the Waldo.*
(*while supplies last)

Also Available for PREORDER:

Ian McQue’s Remora 4th Ed!

Ian McQue’s Remora’s 4th edition is also available for PREORDERS. Start your fleet now!

PREORDER the Ramora 4th Ed Here »

Price: $150+ Shipping
Shipping Estimate: June 2013

Ian McQue’s Sky Mark Buoy

Ian McQue’s Sky Mark buoys are also available. These buoys will look great guiding your other Ian McQue airships into port.

ORDER the Sky Mark Here »

Price: $60 each (or two for $110) + Shipping
In-Stock Now!

Freaky Gothic, designed by Calum Alexander Watt and sculpted by David Richardson is now available for preorder! This 1/8 scale figure kit contains 24 resin pieces, detailed instructions, and concept art. This visitor from another world, lost in time has a head-height (not including the hat) of approximately 24cm and would be a great piece for any Steampunk or Historical Miniatures fan with a taste for the unique.

Preorder Freaky Gothic Here »

Price: $130 USD + Shipping
Estimated Shipping Date: 5.15.2013

Preorder Freaky Gothic Here »

[Show as slideshow]

From our Facebook post 23 hours ago: [the best place for these small tidbits of info so PLEASE "like" us!]

Looks as if everything that I have on preorder is arriving between Friday the 5th and Tuesday the 9th. Which means everything should be shipping be the end of next week. I’m one man, with several hundred boxes to pack and ship…. so please be patient and give me a couple days to get it all done. Thanks all!

Calum Watt’s Freaky Gothic »

First-up is Freaky Gothic by Calum Watt and David Richardson. We’ve of course shown this before, so this is just a reminder that the tentative preorder start date is next Friday, 4.5.2013. I say tentative because I don’t have a casting quote yet as the master is in port-print clean-up and the caster hasn’t seen it yet. As always, as soon as I know, you’ll know! Until then, enjoy the pic and tell your friends! Click here to get a notification when the preorder starts.

Ian McQue’s Waldo »

I finished the master and etch design a few weeks ago and sent this to the caster for production. The tentative preorder start date is 5.1.2013 with the price being somewhere around $120 if all goes well with the casting quote. The Waldo has many resin parts, as well as 2 LARGE photoetch frets to make up the wheelhouse as well as other details, laser-cut windows that will be sandwiched between PE frames as you can see in the etch design image below, and a laser-cut and etched wooden deck. It’ll also come with string and wire to complete it. There’s a lot of detail and multimedia packed into this kit so it’ll be a lot of fun to construct and weather. The hollow 2-part hull has a full engine design inside of it that you can see through the grates on the deck or from the thruster hole below. The Waldo also comes with a 3D designed pilot by Ian McQue and Rishi Nandlaskar who sculpted the Deckhands set. More info on the actual price when info comes in. Click here to get a notification when the preorder starts.

1/35 Barrio Guy used for size reference.

[Show as slideshow]

FichtenFoo’s Implausible Long-Nose Submersible »

I started my pre-release build-up of the Implausible Long-Nose Submersible on FichtenFoo.com. Check out the pics and place your preorder today!

Preorder Updates »

The following PREorder items should be shippigng by 4.8.2013:

• Rook
• Pawn Brigade
• Implausible Fish-Shaped Submersible
• Submariners
• Skipper

The Drone Sniper, designed by Mike Jensen is now available for PREorders at the low price of $99.00 USD (+ shipping)! This is the first in our like of more affordable 1/8 scale figure kits and has a LOT of detail! With 16+ parts it fits together with ease. Estimated shipping date: 4.20.2013.

[Show as slideshow]

Mike Jensen’s Drone Sniper »

Before you’ve heard the shot, you’re already dead. The 1/8 scale Drone Sniper print is done and ready for casting. The print looks amazing and if all goes well with the casting quote, it’ll be our most affordable large scale figure yet, which is the goal for our 1/8 scale figure line.

Preorder Starts: 3.20.2013
Shipping: Late April 2013
Price: TBD (sorry, but soon!)

Click here to get a Drone Sniper Notify Me email.

[Show as slideshow]

Manchu’s Steam Car »

Philippe Bouchet, aka Manchu’s 1/35 Steam Car is just about ready for production. The figures, modeled by Pedram Karimfazli, are complete and look great in the car. We should have a final, color render of that soon. Meanwhile, here’s a shot of the Steam Car and Figures separately. Preorders start in April 2013!

[Show as slideshow]

Christophe Desse’s L’Estafette »

Here’s the final images of Christophe Desse’s 1/35 L’Estafette w/figures (included with kit!). Of note are the new rims. After some feedback and research of wire rims done with photoetch, we realized that it’s difficult to design, (not really a problem for us) difficult to cast as we wouldn’t want to split the wheels in half like more PE/Resin wire wheels do for 1/35 motorcycles so would mean each wheel would have 5-6 parts that would have to fit PERFECTLY and resin shrinkage is always a problem, and difficult for the average modeler to do correctly the first time without needing extra wheels (why most 1/35 motorcycle kits don’t have wire wheels as the default). So what we’re going to do is have the wheels be 4 cool dieselpunk mag wheels, with two optional hubcaps for the rear wheels. We may do an optional set of wire wheels if there’s enough interest. Let us know!

[Show as slideshow]

Since we’re finally seeing (and doing) some build-ups of the Dustbuster we’re having a sale on it! For a limited time (3.18.2013 to be exact) you pay only $90 for the kit which retails for $99.

Click here to get the 1/35 Dustbuster kit!

Dustbuster Build-up by FichtenFoo »

Here’s some shots of the FichtenFoo (Michael Fichtenmayer) Dustbuster build-up along with a short SBS on how I achieved the dusty, muddy finish.

[Show as slideshow]

Dustbuster Build-up by John Jenkins »

John Jenkins posted shots of his great Dustbuster build-up on Facebook. With his permission I’m reposting them here for you to see.

[Show as slideshow]

Click here to get the 1/35 Dustbuster kit!

That’s right folks, it’s time for some oceanic fun with the all new Prof. FichtenFoo’s Implausible Fish-Shaped Submersible and Christophe Desse’s Submariners and Skipper! All three of these Steampunk-styled kits are in 1/35 scale. All three will be shipping in Early April at the latest. The Skipper is the long awaited pilot for the original Fantastical Fish-Shaped Submersible (which is in stock now @ $99) and comes with a new seat and control sticks. Will be great for ships, balloons, etc!

Implausible Long-Nose Submersible » $99 + Shipping
Christophe Desse’s Submariners » $35 + Shipping
Christophe Desse’s Skipper » $18 + Shipping

Buy These Items Together and Save!

Long-Nose Submersible + Submariners: $129
Fantastical Fish-Shaped Submersible + Skipper: $114

Fish-Fry Friday »

First up, the new fish sub, Prof. FichtenFoo’s Implausible Long-Nose Submersible goes up for preorder on Friday March 1, 2013 along with Christophe Desse’s Submariners and the Skipper. All three of these Steampunk-styled kits are in 1/35 scale. All three will be shipping in Early April at the latest. The Skipper is the long awaited pilot for the original Fantastical Fish-Shaped Submersible (which is in stock now) and comes with a new seat and control sticks. Will be great for ships, balloons, etc!

Prof. FichtenFoo’s Implausible Long-Nose Submersible » $99 + Shipping

Christophe Desse’s Submariners » $35 + Shipping

Christophe Desse’s Skipper » $18 + Shipping

L’Estafette Renders »

Christophe Desse has posted some fantastic renders of his upcoming 1/35 scale L’Estafette. I love these because they look like finished plastic figures. Cool stuff coming in May 2013!

FichtenFoo’s Orb Ship Build-up »

I finished up my Orb Ship build-up last week after putting it aside for several months while working on other masters and product launches. It’s a really fun build and if you haven’t had a chance to get one, you can preorder the next edition on Friday. Here’s the pics of my build-up and more detailed info/tutorials on the build can be found on my blog at FichtenFoo.com.

[Show as slideshow]

12►

Scott Robertson’s Orb Ship 2nd Ed Preorder »

The Scott Robertson 1/48 scale Orb Ship‘s 2nd Edition will be available for PREorder on Friday 3.1.2013 as well. This very large ship is $155 + Shipping.