Tag Archives: 1/6 Scale

Derek Stenning’s Dystopic Final Print Master

dystopicmaster1

Time for me to gush because I’m very excited about this! I got the first sample image of the Dystopic 3D print yesterday and was blown away. They even put it together with wire for photos before sending it my way. The guys at Ownage outdid themselves on printing this piece as you can see. Gene Campbell did a fantastic job on all of the fabric and chipping textures and the final print really does them justice.

dystopicmaster4

Scale: 1/6
Kit Materials: Resin, Photoetch, Metal Wire, Waterslide Decals
Release Date: Early November  
Price:
TBD

dystopicmaster2

The helmet is in several parts and is removable. I’ll take photos of the individual parts when they arrive. Note that the arm/leg loop-straps are not attached to the pre-build as we had them printed on numbered sprues to make building easier. The flower will likely be a photoetched part as that would otherwise be hell to cast.

dystopicmaster3 dystopicmaster5

iMech News 6.16.2012

Really big update today ladies and gents! Three new designs and one announced a while ago seemingly risen from the dead. And of course the usual preorder/restock updates.

Calum Watt’s Freaky Gothic »

I started talking with Calum Watt a few months ago about collaborating on some of his cool mechanical designs. (see his sites here and here) He’s working on fleshing those plans out for us, but meanwhile he updated a very old sketch I was very interested in using as the Squid Sub pilot/captain.  This cool steampunk-esque figure will be available with the Squid without the coat as the pilot. A separate coated figure will also be available in 1/35 aka 50mm scale. But not only that… the figure is so cool that I’m really considering doing a 1/6 scale (300mm, 12″) version as well. The figure will be 3D sculpted by David Richardson. David’s been collaborating with us on a number of unannounced projects already and does amazing work. (don’t ask… I can’t tell!) You can view David’s site here. No release date yet on the individual figures, but the seated pilot will come with the Squid. Fill out the Notify Me to get info when a preorder is available.

gothic01
Pre-Sculpting Plans^

gothic02
Original sketch circa 2005^

 

Alb-Lab’s T-Zero »

This one has been in the works for a while from Alb-Lab, makers of the Markov Racer. The long sleek T-Zero designed and fabricated by Alberto Longo & Daniele Cattarin is their latest anti-gravity racing endeavor. Featuring resin body and a vacuform canopy. No word yet on decals or PE parts. Expect this one to be available in Fall 2012. Fill out the Notify Me to get info when a preorder is available.

7_dsci0014 dsc_4498

 

FichtenFoo’s Fish Sub II »

Since the Squid Sub is delayed, I still wanted to have a new FichtenFoo steampunk vehicle available for 2012. A while back I saw some cool fish X-rays and one caught my eye. I finally sat down and started the master last week for a new Fish-Shaped Submersible based on the Longnose Butterflyfish. It’s a cool-shaped fish and depending on how squared back I make the fins, (do a Google image search to see how the actual fish looks) will look very sleek and fast. The eyes are set low on the body so this craft will be piloted by someone seated in a prone racing motorcycle position in order to see out the windows. I’ve just gotten the basic body shape done so far so expect more images as I detail it up. It’s slightly smaller than the original Fish Sub I did a few years ago. I do know this kit will use LOTS of photoetch, a potential white metal (pewter?) propeller, clear glass eyes like the Hornethopter, and of course resin and wire. Watch for a preorder later this year. Fill out the Notify Me to get info when a preorder is available.

fishsub2announce fishsub2prog-01

 

Mike Jensen’s Drone »

A loooong time ago I announced we would be kitting Mike Jensen’s “Drone” figure. He sent me the 3D files a few weeks ago, but I didn’t have any renders until now. This will be a 1/6 scale resin figure kit. Approximately 300mm/12in. tall, but no base. No info on the release date yet, but I’ll keep you updated of course when I know more and you can also fill out the Notify Me to get info when a preorder is available.

dronefinal

Final Preproduction Render ^

 

Steampunk Contest Voting »

Voting continues for the Steampunk Costume Contest. Click here to submit your vote by June 30th.

Preordered Item Updates! »

First up is the preorder info. I have several casters working diligently on getting these done so that I can get them out the door and into your hands.
Sasha 1/35:
All 1/35 Sashas are shipping Monday UNLESS they’re paired with a 1/35 Deckhands set and need shipped together.
Sasha 1/32:
Replacement casts shipping by 6.20.2012 to those of you that filled out the replacement form.
Deckhands 1/35: Different caster from Sasha, the 1/35’s and some of the 1/24th’s I believe are shipping on Monday 6.18.2012 to me from the caster. Once I receive them I’ll box and ship immediately as usual.
Deckhands 1/24:
Same caster as 1/35’s, I might have a few next week to start shipping out… not 100% clear there. However I need to wait for the labels to get back from the printer. Wasn’t expecting the resin so soon!

Upcoming Preorders »

Remora 3rd Edition: At caster who will start next edition production next week. I should be able to start a preorder in Early July.
Frankenstein 1st Edition: At caster who will start molding next week. I should be able to start a preorder in Early July.
Chompbot #5 & Chomp Troopers: Both are at different casters and are in production. I should be able to start a preorder in Mid July.
Other upcoming preorder items: Sasha 1/24, Barrio Guy 1/35, Barrio Guy 1/24, Orbship, and Dustbuster.

Restocks! »

We’ve sold out of a LOT of items this past month and will be casting new editions of some of your favorites.
Remora:
We’re still aiming for a July restock of these. Fifty of the 3rd Edition kits will be available for preorder next month.
Sasha 1/35:
We’ve not got the first 100 out the door, but there’s been a lot of interest in her. As soon as I can get the first ones done I’ll start a preorder for the next batch.
Hornethopter: Lots of interest in this little beastie after we sold the last 10 at Wonderfest. I’ll attempt to restock these in August or September…. need to get some of our new scheduled releases out the door first.
FichtenFoo’s Fish-Shaped Submersible: Gave the master back to the caster to start molding for a 6th run! Planning to restock this one early Fall 2012.
Kastor: Same as the Hornethopter… planning to restock this one early Fall 2012.

Fill out the Notify Me to get info when a preorder is available.

Derek Stenning’s Dystopic

imech_ek_announcement

Been a while since I’ve posted about this Derek Stenning/Born in Concrete release. 3D artist Gene Campbell has been hard at work putting the finishing touches on the 3D and now he’s ready for print with a tentative August 2012 release date. Because we’ll be doing a series of Derek’s figures in  a large 1/6 scale, (a female release next) the concrete base-chunk from the painting was done away with in favor of a larger orb base with a flat bottom. The concrete base was done in 3D, but the high print cost and sheer size of it (3/4 of the entire kit bulk) would make the kit not very affordable. (plus the international shipping would be excessive due to the estimated over 4lb weight) The three of us decided to focus instead on the figure portion of the kit and provide a base-type that can be used throughout the series and look nice together.

Be sure to click “full size” on these render images when they pop-up to see all of the amazing detail!

frnt_final_sphere

The plan is for the orb-base to be produced hollow for reduced kit and shipping costs. The modeler can then fill the orb with weights of their choice in order to have a stable platform for the off-centered figure pose.

final_lineup_sphere

As you an see in these hi-res renders, Gene has added a lot of great texture detail to the 3D model. I think that surface texture detail will make this will be a joy to paint and display. Price: TBD

facefinal

Be sure to click “full size” on these render images when they pop-up to see all of the amazing detail!

figurefinal

 

Rick Cantu’s Vampire Progress

rickdtmvamp-01

The amazingly talented Rick Cantu is currently painting up a sample of the 1/6 scale Dmitry Parkin Vampire kit. He sent these pics to me this morning and said that I could share them. He’ll be doing a build-log soon with more images and we’ll post it up when he’s ready. For now, enjoy the dirty, decayed goodness!

Get your Vampire here!

rickdtmvamp-02

iMech News 2.15.2101

Another month and time for another iMech news update! This time we show off some Ian McQue’s Remora build-ups and the latest for the upcoming  figure, set, a cool new Flyer from Christophe Desse, and the long awaited progress shots of Scott Robertsons Orbship!

Christophe Desse’s Red Star 47

redstar47-4

I first saw a photo of this cool Russian looking flyer by Christophe Desse, a 3D artist for Naughtydog, a few years back on the Concept Ships blog. I loved the design, saved it to my HD, but thought I was looking at a photo of a finished model kit so I didn’t attempt to contact Christophe about producing it. Luckily, he contacted us and as it turns out, the image was not a finished model, just a 3D render made to look like a completed toy/model.

redstar47-1

Christophe has been hard at work making small design changes to the flyer and designing all new figures to go with the kit. Look for the Red Star 47 flyer to be available for preorder November 2012.

KIT RELEASE DATE: November 2012
KIT SCALE: 1/35

 

Scott Robertson’s Orbship

sr_blast_orb_ship_yg

Been a while since we had news of this, but here are some in-progress renders of Scott Robertson’s 1/48 scale Orbship. Scott is still fine-tuning and adding details and 3D artist friend of his is working on a figure to accompany it.

feb_orb_progress_1

 

Adrian Smith’s Frankenstein

prodchallenge001_a

Frankie is at the caster slated for an April 2012 release. Meanwhile I’ve been working on gathering materials and doing the print work for the kit. Because it’s really cool, I wanted to show off the chain maille that will come with the kit. It’s hard to see in the renders, but there’s a bit of maille under the belt and shoulder armor. Each kit will come with a 3 inch square sheet of 1/8″ steel ring maille to use to complete the kit.

frankenmaille-01

 

Ian McQue Figure Set #1

Here’s a few shots of the 3rd figure in the upcoming Ian McQue figure set. Like the Rigger and Mopper, this waving crewman figure was modeled by Rishi Nandlaskar. Watch for upcoming shots of the final two in the set!

mcquefig3

 

“Ian McQue’s Remora” Build-ups!

fichtenfoo-remoras-wp

Some really great build-ups of the First Edition Remora kits are appearing on our forums. Check them out here and leave the modelers some comments. I (FichtenFoo) finished my two Remora a few weeks ago. (pics here) The blue one is mine and the red was done for Ian based on the box art. He should receive it any day now so I can’t wait to hear what he thinks!

There’s still a few 2nd Edition Remora kits available for preorder. Click here to place a preorder of Ian McQue’s Remora.

 

Dmitry Parkin’s Vampire Preorder Info

The Dmitry Parkin Vampire is available for preorder right now and will be shipping next week. Watch for an upcoming build-up of the Vampire by the very talented Rick Cantu of Dragonstooth Miniatures!

announcevamp0

iMech News 1-23-2012

Welcome to another edition of iMech News! This time we’ll announce a new upcoming FichtenFoo/MechaSkunk product collaboration, a new Ian McQue product, preorders and restocks, and some new pics of upcoming releases.

FichtenFoo’s Squid-Shaped Submersible!

This counterpart to the steampunk-styled Fish-Shaped Submersible was started by hand almost a year ago, but due to a less than awesome 3D print of the drill, was put on hold. Rob Fuchs of MechaSkunk who did the drill 3D file for me originally has taken on finishing the rest of the craft in 3D based on my sketches and half-done master parts. He’s adding some of his own touches and the progress is awesome. Can’t wait to see how the dive-planes and interior look. While the Fish-Sub is a peaceful civilian styled craft, the Squid is indeed a predator. Using the enormous screw propeller to streak through the water, it can ram vessels or use its tentacles and “beak” drill to fill their hulls full of holes. A true terror of the deep! 1/35 Scale! Look for the squid to be available late-summer 2012.

Discuss Squid-Shaped Submersible in the Forum!

squidsub-01 squidsub-02 squidsub-03

Here’s my initial sketch with completely outdated notes.

squidsketch

Chompbot #5’s 3D Print and More Jake Parker Figures

Ownage sent us these images of the 3D print before they ship it to Jeff Brewer, the 3D/traditional sculptor who will be adding some final touches by hand. The bot is roughly 8.5″ (215mm) tall and looks to be a very fun build-up. The body is hollow to allow for lighting.

img_8239 img_8240 img_8241

Jose Alves da Silva is almost done with the Chompbot Figure Set as well, and here’s a look at two more figures in-progress. The other figures can be seen in the last news update here.

chompbotfigs-01 chompbotfigs-02

Ian McQue Figure Set #1

We’d hoped to have this done before releasing the Remora, but it is coming! Here’s a preview of two of the five figures coming soon in the first Ian McQue Figure Set. The “Mopper” and the “Rigger”. These figures, sketched by Ian and 3D sculpted by Rishi Nandlaskar will look great on the deck of the Remora and future Ian McQue ship releases. We hope to release these in Spring 2012. 1/35 Scale!

mcque-01 mcque-02

Ian McQue’s original character sketches:

mcque-03

Vampire, Fish-Sub, and Remora Preorders

The Dmitry Parkin Vampire and FichtenFoo’s Fantastical Fish-Shaped Submersible are avaiable for preorder right now and will both be shipping in Early February. The Remora will be back up for preorder on January 31st 2012 and will ship sometime in March.

announcevamp0

Dmitry Parkin’s Vampire Preorder NOW!

announcevamp3

Dmitry Parkin’s 1/6 scale Vampire kit will be available for preorder in the iMech Shop on January 20th, 2012. This huge and nicely detailed figure kit will be $135.00 USD + shipping. The kit includes 11 resin parts and a fret of very fine photoetched feathers for the arrows. The Vampire will ship in early February.

Click here to order!

announcevamp2 announcevamp7

iMech News 12-16-2011

There’s lots going on with iMech and our collaborators. A lot of projects are near completion a means we’ll start to hit our goal of one major release a month soon! Here’s some random news highlights:

Miguel Lopez Dustbuster

I’ve been getting a few emails and PMs asking when the Dustbuster will be ready. Here’s some shots of the model so far. It’s getting really close to completion and we’re hoping for a release no later than April 2012.

dustbuster-01 dustbuster-03

Adrian Smith’s Frankenstein

This wasn’t planned initially as an Industria Mechanika release, but we couldn’t resist when we saw it! The Frankenstein started as a contest for CGHub where Adrian Smith supplied a few sketches and it was up to 3D modelers to interpret them. The winner got a printed copy of their design. I asked Adrian, CGHub and the winning artist, Rishi Nandlaskar if they’d like to produce it into a model and the answer was a resounding yes! The print is on it’s way to me now so expect this “beauty” to be released in the first half of 2012.

prodchallenge001_a img_6987 prodchallenge001_z

More Adrian Smith Designs

We also have two more of Adrians designs in the works and will be collaborating with Adrian and CGHub soon on another contest. Watch CGHub for details.

Jake Parker’s Chompbot #5

The 3D portions of the Chompbot are at the printer and should get to Jeff Brewer, our modeler for hand-refinement soon. Once he gets them and takes some pics I’ll post them. We’re also working on more accompanying figures by Jake Parker and Jose Alves da Silva as seen below.

chompbotfigs-01 chompbotfigs-02 chompbotfigs-03

Kallamity’s Kastor

The Kastor is on its way to us from Luca and as soon as I get it and take photos to start the instructions, and send the PE files to the etch producer, it’ll be on its way to the caster. Expect it in early 2012!Luca took some inspiration from Ian McQue’s rendering and added the following figures to the kit. Woo!

kastorfigs

Dmitry Parkin’s Vampire

The Vampire is at the caster and will begin production as soon as the 1st Edition Remoras are out the door. The Vamp is our next release so watch for preorders to begin in January!

vampire3

Ian McQue’s Remora

The Remora 1st Edition kits are almost done at the caster and I’ll receive a batch next FridayThe caster has orders to keep producing more after the 1st 50 are completed so watch for the 2nd Edition to hit the site in January.

remora-45

Derek Stenning’s Dystopic

The 3D model of Dystopic is just about complete and looks amazing. Derek wants to make sure it’s 100% perfect before we show it off, but it’s definitely coming soon!

imech_ek_announcement

TMMI’s Hornethopter Review

It’s hit the news stands and iPad so check it out!

Dmitry Parkin Vampire Master Print

im-dp-vampire-01

I received the print of the Dmitry Parkin Vampire yesterday and just had to immediately take pics to show it off. The 1/6 scale print is amazingly detailed and really brings this creature sculpt to life.There’s only 6 printed parts to this kit, but each part fits perfectly and is beautifully detailed.

The complete final print w/base stands 10.75 inches / 270mm!

I am waiting on an order of photoetch for the arrow feathers (which will look amazing with their individually etched hairy strands)  and will include resin arrow shafts/heads to match the original artwork.

Here’s the rest of the pics!

 

 

, , , , , , , , ,

Dmitry Parkin Collaboration

vampire3

Industria Mechanika would like to announce our collaboration with Dmitry Parkin, an award-winning 3D sculptor who’s specialty is dark fantasy character and creature designs. He’s done work as a freelance artist for games such as Killzone 3, Fallout 3, Aliens: Colonial Marinets, and more. Dmitry was the 3d ultimate champion on Dominance War III.

We’re in the 3D print phase of producing Dmitry’s horrifying Vampire figure. A very creepy and cool take on this mythological monster. This piece is 1/6 scale. Price and release date to be determined.

He’s also working on a modified version of the Gargoyle in 1/6 scale complete with Gothic architectural base.

You can see more of Dmitry’s works on his website: ParkParkin.

Discuss this on our forums »

Samples of Dmitry Parkin’s Works »