Tag Archives: Calum Watt

iMech News 7.22.2014

So much to talk about this month! You might have noticed (because I’ve been promoting it!) our new look, especially our completely redesigned store. Also new and upcoming mecha designs by Christophe Desse and Kallamity, disappointing news about iMech going to JerseyFest, and more!

About Our New Look »

For the past 10 days or so I’ve been redesigning the iMech Shop and Blog. (The forum is next!) This update adds a lot of new functionality and improvements to the store, both in look and function. It should be a better shopping experience for everyone with far less bugs than the old shop. The trade-off however is that the store needed to be done from scratch. That means all user accounts for the old store are not accessible in the new store, but so are the hassles of lost password retrieval. The accounts and orders still exist in the old store which I’m keeping for now in an undisclosed location for taking care of existing preorders, but all new accounts and orders will go through the new and improved shop.

AnnouncementLargeWide

We hope you enjoy the new site! It’ll make adding an upcoming, totally secret product line that’s in development a LOT easier. ;-) News on that in a few months when it’s further along.

Subscribe To Our Newsletter! »

For now, to receive product preorder and restock notifications, sign up for our newsletter either by entering your email in the shop footer or by making a new shop account.

KRBL-TR-47 [Krabbel-Tiere] »

WebKRABBELlarge

With the new look comes a new product: Christophe Desse’s upcoming KRBL-TR-47 scout walker! Coming later in 2014 from the Red Star 47 and Her Majesty’s Estafette. Note: The figures shown are from our Ground Crew and Flight Ready figure sets. KRBL-TR Scout Walker will come with new figures for driver, and turret, but the KRBL-TR will work many of our figure sets. Final product
may vary.

Kallamity News »

Briegel

It looks as if Kallamity‘s Briegel is going to be coming to the iMech store after all! So watch this space and subscribe to our newsletter for more news and details about the Briegel!

09a

Kastor

We have a few Kastor Hovertank kits back in stock. Get them while they last!

Kastor_LRG

Hopper Decals »

HopperDecalSample2

We are now offering the decals that come with Calum Watt’s Hopper as a stand-alone product. They’re cool enough to use on a variety of project ideas, or to associate another build-up with your Hopper via markings.

SavageForged Mini’s Black Moth Heavy Build-Up »

Check out this fantastic paint-up of our Black Moth [Heavy] by SavageForged Minis! He’s selling it so contact him for more details!

Untitled-4

About JerseyFest »

I really wanted to make it to JerseyFest this year, purchased a table, made reservations, but it just wasn’t in the cards. Most don’t realize that I’m a very small business and as such almost everything that needs done is done by me. It piles up. Now factor in that Wonderfest and a few resellers depleted most of my stock that I would had been taking to JF and well… I could either spend the money and drive 6 hours to go to JF and stand behind a table apologizing to everyone, telling them to preorder on our website, or I could do that here and on Facebook and use the saved time and money to do some amazing things. This website redesign is just one of many things I had planned for the summer that I am able to work on now. More coolness is on the way!

But I’m not “a monster” who’s going to leave the attendees at JF hanging. Prove that you were there and I’ll give you free shipping on orders placed after the show between 8.3 and 8.8.2014. The “Best of iMech” trophy will also be awarded there still, just not judged by me as planned. No worries though, the judges are awesome!

The Hopper

Hopper_LRG

ORDER ‘The Hopper’ Here »

The 1/35 scale UNS Hopper HPR719 conceptualized by Calum Alexander Watt and 3D sculpted by Stefano Bernardi is in-stock! This large aircraft is approximately 19cm/7.5in long as you can see in the pattern images below and comes with 3 figures. The Hopper will be on sale for a limited time for $150 USD + Shipping.

iMech News 6.5.2014

So much going on! SO MUCH!!!! It’s been a crazy couple of months with preparing for Wonderfest and failing to complete 2 out of 4 of the planned new releases in time for the show. BUT… these releases are still coming and soon. So let’s get to the good stuff….

WonderFest USA 2014 Wrap-Up »

2014wfbooth

Wonderfest was a few days ago and it was a total blast… what I got to see of it anyway as most of my time was spent behind the table. But I got to see a lot of you that I met last year and meet a bunch of you for the first time. I’ve already purchased my table for next year (moving from #7 to #80) so will get to see everyone again. There was only one iMech product in the show which was pretty disappointing (discussing it with everyone here) so I’m looking into doing a Best iMech award if only in an unofficial fashion. Stay tuned for that!

JerseyFest Aug 1-3 2014 »

I didn’t make it to Jerseyfest last year for a variety of reasons, but this year it’s going to happen. I already booked the hotel and table so it’s on! The Best iMech award is going to happen at that show for sure so get your build-ups done and on the tables in the contest! I’m not sure what the award will be yet… at least a trophy… probably a gift cert for the shop too, but it should be fun regardless to see a bunch of our build-ups in one place! Hope to see you there!

Online iMech Contest? »

And to not leave our VERY large international contingent in the lurch, we’ll be doing an online contest soon as well. This will likely be an end of the year contest, something like a Best iMech build-up of 2014 and will happen in early January. Start your build-ups now, take GOOD photos of the entire process (because that’s awesome for everyone), and details will come.

The Hopper »

hopper_med

Preorders for the Hopper start in less than 12 hours from now! This large and very cool aircraft by Calum Watt and Stefano Bernardi will retail at $160 each + Shipping. Preorders will be eligible for a $10 discount. More on this in our Hopper special post tomorrow! Get on the list and prepare to preorder here.

Bella »

bella_med

Our 1/35 scale Bella, by Pedram Karimfazli, is now available for orders. There are not too many left from this first batch of 50 so I put in an order for another batch which should be here in about 30 days. She’s only $15 for a limited time so get her here.

Sasha in 1/20! »

sasha20_med

Our all-new 1/20 scale Sasha the Welding Girl is also now available! This time she’s in injection plastic and only $20 for a limited time so get yours here.

Project X by Eric Chu »

projectx_lrg

We announced this at Wonderfest 2014 this past weekend and now we’re announcing it to the world! Eric Chu, the concept artist behind the new Battlestar Galactica designs is redesigning a classic spacecraft for us in this fun upcoming 1/72 scale release. More details to come, but get on the NOTIFY ME list here.

More Product Announcements! »

Stay tuned for more upcoming product announcements as we’ve got at least 4 coming up in the next few months!

iMech News 12.10.2013

It’s time for the 2014 Preview!

I’ve been mentioning on our Facebook page that we’ve got many new products in development and that I would soon be showing them off. Well, wait no longer as the announcement time is here! This isn’t everything we’ve got coming up, but will give you a taste of what to expect.

Share This Image »

First up, go to Facebook, Twitter, friends, etc and please share this Promo Image. This will help us spread the word about our upcoming (and existing) products and keep bringing these amazing pieces to life. You can share the promo image from our Facebook page by clicking here. Thanks! We all appreciate the support!

2014previewflyer

Adrian Majkrzak’s Black Moth [Heavy] »

blackmothheavy_lrg

This Heavy Trooper, the first of a 3-person squad, comes from a new collaborative duo of artists joining our roster. Helmet can be displayed in place of the head, or held in the free hand with a full portrait head. Sculpted in 1/8 scale by Mike Kime of Epic Games.

Visit iMech Sh0p Page for the ‘Black Moth [Heavy]‘ here »

Click the ‘Notify Me’ link at the top of the page to get an email when this product is ready for preorders.

Calum Watt’s ‘The Hopper’ »

hopper_lrg

From the concept artist behind our Freaky Gothic figure release! This 1/35 scale flyer comes with 3 figures! (1 standing and 2 pilots seated back-to back) Sculpted by the talented Stefano Bernardi.

Visit iMech Sh0p Page for ‘The Hopper’ here »

Click the ‘Notify Me’ link at the top of the page to get an email when this product is ready for preorders.

Derek Stenning’s EK Cosmonaut Series »

ekpromo2

An all new 3-figure series by Derek Stenning and Gene Campbell, the team-up that brought you Dystopic! This series of <b>1/8 scale</b> figures will be released throughout 2014. Each will have a laser-etched base which will interlock with the other two. The first figure is 95% ready for printing so watch for him in early 2014!

Visit iMech Sh0p Page for EK Cosmonaut #1 here »
Visit iMech Sh0p Page for EK Cosmonaut #2 here »
Visit iMech Sh0p Page for EK Cosmonaut #3 here »

Click the ‘Notify Me’ link at the top of the page to get an email when these products are ready for preorders.

Christophe Desse’s L’Estafette »

estafette_lrg

Another amazing creation by Christophe Desse, designer behind the Red Star 47 and many of our figure sets. This 1/35 scale roadster comes with three figures and two different sets of tires for either mag-rims or photoetched wire rims.

Visit iMech Sh0p Page for the ‘L’Estafette’ here »

Click the ‘Notify Me’ link at the top of the page to get an email when this product is ready for preorders.

Christophe Arnold’s Walrus and Figures »

walrus_lrg

The Walrus is a large beefy APC designed and 3D sculpted by the talented Christophe Arnold. Match this up with Michael Herm’s Rook and other modern military kits for some great diorama possibilities! This large 1/35 scale armored personnel carrier and 4 figure set will be a great addition to any sci-fi or armor modelers collection!

Visit iMech Sh0p Page for the ‘Walrus’ here »

Click the ‘Notify Me’ link at the top of the page to get an email when this product is ready for preorders.

Solid, Liquid, and Gas Containers »

solids_lrg liquids_lrg gasses_lrg

One of the rare “real world” products we’ve developed. Each 1/35 scale set will cost $25 and be available in January 2014.

Visit iMech Sh0p Page for the ‘Solid Container Set’ here »
Visit iMech Sh0p Page for the ‘Liquid Container Set‘ here »
Visit iMech Sh0p Page for the ‘Gasses Container Set‘ here »

Click the ‘Notify Me’ link at the top of the page to get an email when these products are ready for preorders.

Preorder Freaky Gothic!

Freaky Gothic, designed by Calum Alexander Watt and sculpted by David Richardson is now available for preorder! This 1/8 scale figure kit contains 24 resin pieces, detailed instructions, and concept art. This visitor from another world, lost in time has a head-height (not including the hat) of approximately 24cm and would be a great piece for any Steampunk or Historical Miniatures fan with a taste for the unique.

Preorder Freaky Gothic Here »

Price: $130 USD + Shipping
Estimated Shipping Date: 5.15.2013

freakygothic_04_lrg

Preorder Freaky Gothic Here »

iMech News 3.28.2013

Time again for a little news! Today we finally show off the Ian McQue Waldo as well as some housekeeping with release dates, etc.

Calum Watt’s Freaky Gothic »

freakygothic01

First-up is Freaky Gothic by Calum Watt and David Richardson. We’ve of course shown this before, so this is just a reminder that the tentative preorder start date is next Friday, 4.5.2013. I say tentative because I don’t have a casting quote yet as the master is in port-print clean-up and the caster hasn’t seen it yet. As always, as soon as I know, you’ll know! Until then, enjoy the pic and tell your friends! Click here to get a notification when the preorder starts.

Ian McQue’s Waldo »

waldo-00

I finished the master and etch design a few weeks ago and sent this to the caster for production. The tentative preorder start date is 5.1.2013 with the price being somewhere around $120 if all goes well with the casting quote. The Waldo has many resin parts, as well as 2 LARGE photoetch frets to make up the wheelhouse as well as other details, laser-cut windows that will be sandwiched between PE frames as you can see in the etch design image below, and a laser-cut and etched wooden deck. It’ll also come with string and wire to complete it. There’s a lot of detail and multimedia packed into this kit so it’ll be a lot of fun to construct and weather. The hollow 2-part hull has a full engine design inside of it that you can see through the grates on the deck or from the thruster hole below. The Waldo also comes with a 3D designed pilot by Ian McQue and Rishi Nandlaskar who sculpted the Deckhands set. More info on the actual price when info comes in. Click here to get a notification when the preorder starts.

waldo-04

1/35 Barrio Guy used for size reference.

waldo-02

 

FichtenFoo’s Implausible Long-Nose Submersible »

fishmkii-15

I started my pre-release build-up of the Implausible Long-Nose Submersible on FichtenFoo.com. Check out the pics and place your preorder today!

Preorder Updates »

The following PREorder items should be shippigng by 4.8.2013:

Calum Watt’s Freaky Gothic Update

Originally slated as a 1/12 scale release, David Richardson added more detail to Freaky when we decided to up the size to 1/8 scale. Check out the old pics here compared to the new ones with added detail. It’s going to be a fantastic piece when it goes into production! Click here to get a notification when Freaky Gothic will be available for preorder.

freakygothic01

Click to enlarge ^

 

 

Calum Watt’s Freaky Gothic

gothic03

As promised before my vacation last week, here’s some almost done renders of the upcoming Calum Watt “Freaky Gothic” modeled by the amazing David Richardson. Originally slated for 1/12 scale we’ve decided to increase that and do 1/8 scale instead. Seems that most of you want the figures to be larger and that’s fine. 1/8 scale should be a nice balance between size and costs making them more affordable than our 1/6 scale figures were. Price details to come. David is currently tightening up details and textures since we increased the scale. I’ll show close-up views of this when they’re available.

 

iMech News 6.16.2012

Really big update today ladies and gents! Three new designs and one announced a while ago seemingly risen from the dead. And of course the usual preorder/restock updates.

Calum Watt’s Freaky Gothic »

I started talking with Calum Watt a few months ago about collaborating on some of his cool mechanical designs. (see his sites here and here) He’s working on fleshing those plans out for us, but meanwhile he updated a very old sketch I was very interested in using as the Squid Sub pilot/captain.  This cool steampunk-esque figure will be available with the Squid without the coat as the pilot. A separate coated figure will also be available in 1/35 aka 50mm scale. But not only that… the figure is so cool that I’m really considering doing a 1/6 scale (300mm, 12″) version as well. The figure will be 3D sculpted by David Richardson. David’s been collaborating with us on a number of unannounced projects already and does amazing work. (don’t ask… I can’t tell!) You can view David’s site here. No release date yet on the individual figures, but the seated pilot will come with the Squid. Fill out the Notify Me to get info when a preorder is available.

gothic01
Pre-Sculpting Plans^

gothic02
Original sketch circa 2005^

 

Alb-Lab’s T-Zero »

This one has been in the works for a while from Alb-Lab, makers of the Markov Racer. The long sleek T-Zero designed and fabricated by Alberto Longo & Daniele Cattarin is their latest anti-gravity racing endeavor. Featuring resin body and a vacuform canopy. No word yet on decals or PE parts. Expect this one to be available in Fall 2012. Fill out the Notify Me to get info when a preorder is available.

7_dsci0014 dsc_4498

 

FichtenFoo’s Fish Sub II »

Since the Squid Sub is delayed, I still wanted to have a new FichtenFoo steampunk vehicle available for 2012. A while back I saw some cool fish X-rays and one caught my eye. I finally sat down and started the master last week for a new Fish-Shaped Submersible based on the Longnose Butterflyfish. It’s a cool-shaped fish and depending on how squared back I make the fins, (do a Google image search to see how the actual fish looks) will look very sleek and fast. The eyes are set low on the body so this craft will be piloted by someone seated in a prone racing motorcycle position in order to see out the windows. I’ve just gotten the basic body shape done so far so expect more images as I detail it up. It’s slightly smaller than the original Fish Sub I did a few years ago. I do know this kit will use LOTS of photoetch, a potential white metal (pewter?) propeller, clear glass eyes like the Hornethopter, and of course resin and wire. Watch for a preorder later this year. Fill out the Notify Me to get info when a preorder is available.

fishsub2announce fishsub2prog-01

 

Mike Jensen’s Drone »

A loooong time ago I announced we would be kitting Mike Jensen’s “Drone” figure. He sent me the 3D files a few weeks ago, but I didn’t have any renders until now. This will be a 1/6 scale resin figure kit. Approximately 300mm/12in. tall, but no base. No info on the release date yet, but I’ll keep you updated of course when I know more and you can also fill out the Notify Me to get info when a preorder is available.

dronefinal

Final Preproduction Render ^

 

Steampunk Contest Voting »

Voting continues for the Steampunk Costume Contest. Click here to submit your vote by June 30th.

Preordered Item Updates! »

First up is the preorder info. I have several casters working diligently on getting these done so that I can get them out the door and into your hands.
Sasha 1/35:
All 1/35 Sashas are shipping Monday UNLESS they’re paired with a 1/35 Deckhands set and need shipped together.
Sasha 1/32:
Replacement casts shipping by 6.20.2012 to those of you that filled out the replacement form.
Deckhands 1/35: Different caster from Sasha, the 1/35′s and some of the 1/24th’s I believe are shipping on Monday 6.18.2012 to me from the caster. Once I receive them I’ll box and ship immediately as usual.
Deckhands 1/24:
Same caster as 1/35′s, I might have a few next week to start shipping out… not 100% clear there. However I need to wait for the labels to get back from the printer. Wasn’t expecting the resin so soon!

Upcoming Preorders »

Remora 3rd Edition: At caster who will start next edition production next week. I should be able to start a preorder in Early July.
Frankenstein 1st Edition: At caster who will start molding next week. I should be able to start a preorder in Early July.
Chompbot #5 & Chomp Troopers: Both are at different casters and are in production. I should be able to start a preorder in Mid July.
Other upcoming preorder items: Sasha 1/24, Barrio Guy 1/35, Barrio Guy 1/24, Orbship, and Dustbuster.

Restocks! »

We’ve sold out of a LOT of items this past month and will be casting new editions of some of your favorites.
Remora:
We’re still aiming for a July restock of these. Fifty of the 3rd Edition kits will be available for preorder next month.
Sasha 1/35:
We’ve not got the first 100 out the door, but there’s been a lot of interest in her. As soon as I can get the first ones done I’ll start a preorder for the next batch.
Hornethopter: Lots of interest in this little beastie after we sold the last 10 at Wonderfest. I’ll attempt to restock these in August or September…. need to get some of our new scheduled releases out the door first.
FichtenFoo’s Fish-Shaped Submersible: Gave the master back to the caster to start molding for a 6th run! Planning to restock this one early Fall 2012.
Kastor: Same as the Hornethopter… planning to restock this one early Fall 2012.

Fill out the Notify Me to get info when a preorder is available.