Tag Archives: Christophe Desse

iMech News 7.22.2014

So much to talk about this month! You might have noticed (because I’ve been promoting it!) our new look, especially our completely redesigned store. Also new and upcoming mecha designs by Christophe Desse and Kallamity, disappointing news about iMech going to JerseyFest, and more!

About Our New Look »

For the past 10 days or so I’ve been redesigning the iMech Shop and Blog. (The forum is next!) This update adds a lot of new functionality and improvements to the store, both in look and function. It should be a better shopping experience for everyone with far less bugs than the old shop. The trade-off however is that the store needed to be done from scratch. That means all user accounts for the old store are not accessible in the new store, but so are the hassles of lost password retrieval. The accounts and orders still exist in the old store which I’m keeping for now in an undisclosed location for taking care of existing preorders, but all new accounts and orders will go through the new and improved shop.

AnnouncementLargeWide

We hope you enjoy the new site! It’ll make adding an upcoming, totally secret product line that’s in development a LOT easier. ;-) News on that in a few months when it’s further along.

Subscribe To Our Newsletter! »

For now, to receive product preorder and restock notifications, sign up for our newsletter either by entering your email in the shop footer or by making a new shop account.

KRBL-TR-47 [Krabbel-Tiere] »

WebKRABBELlarge

With the new look comes a new product: Christophe Desse’s upcoming KRBL-TR-47 scout walker! Coming later in 2014 from the Red Star 47 and Her Majesty’s Estafette. Note: The figures shown are from our Ground Crew and Flight Ready figure sets. KRBL-TR Scout Walker will come with new figures for driver, and turret, but the KRBL-TR will work many of our figure sets. Final product
may vary.

Kallamity News »

Briegel

It looks as if Kallamity‘s Briegel is going to be coming to the iMech store after all! So watch this space and subscribe to our newsletter for more news and details about the Briegel!

09a

Kastor

We have a few Kastor Hovertank kits back in stock. Get them while they last!

Kastor_LRG

Hopper Decals »

HopperDecalSample2

We are now offering the decals that come with Calum Watt’s Hopper as a stand-alone product. They’re cool enough to use on a variety of project ideas, or to associate another build-up with your Hopper via markings.

SavageForged Mini’s Black Moth Heavy Build-Up »

Check out this fantastic paint-up of our Black Moth [Heavy] by SavageForged Minis! He’s selling it so contact him for more details!

Untitled-4

About JerseyFest »

I really wanted to make it to JerseyFest this year, purchased a table, made reservations, but it just wasn’t in the cards. Most don’t realize that I’m a very small business and as such almost everything that needs done is done by me. It piles up. Now factor in that Wonderfest and a few resellers depleted most of my stock that I would had been taking to JF and well… I could either spend the money and drive 6 hours to go to JF and stand behind a table apologizing to everyone, telling them to preorder on our website, or I could do that here and on Facebook and use the saved time and money to do some amazing things. This website redesign is just one of many things I had planned for the summer that I am able to work on now. More coolness is on the way!

But I’m not “a monster” who’s going to leave the attendees at JF hanging. Prove that you were there and I’ll give you free shipping on orders placed after the show between 8.3 and 8.8.2014. The “Best of iMech” trophy will also be awarded there still, just not judged by me as planned. No worries though, the judges are awesome!

iMech News 4.2.2014

Hello again! It’s a good day for news here at iMech with some great preorder and upcoming kit announcements! So without further adieu, let’s get on with it…!

Her Majesty’s Estafette PREORDER »

estafette_lrg

It’s taken a lot longer than anticipated, but the resin for the Estafette is on its way. I need to finalize the instructions and get them off to print, but otherwise we should be ready to ship around 4.21.2014! Her Majesty’s Estafette by Christophe Desse comes with wheels to do either the mag or photoetch wire wheels, bending jig, 3 figures, and a LOT of finely cast parts. Preorder now to save 5%! Sale Ends 4.20.2014.

Preorder Her Majesty’s Estafette here »

Kallamity’s WACHTEL »

wachtel_lrg_0

Luca Z of Kallamity (see his Kastor here) has been posting progress images of this future iMech bipedal mecha kit for the last few weeks and now it’s official! The WACHTEL is now in the store so you can get notifications and look at preview images while we await a price and official preorder/shipping date.

Walrus and Porpoise Now Shipping!

walrus_lrg

Christophe Arnold’s Walrus and Porpoise sets are now IN-STOCK and shipping! Order yours now!

iMech News 12.10.2013

It’s time for the 2014 Preview!

I’ve been mentioning on our Facebook page that we’ve got many new products in development and that I would soon be showing them off. Well, wait no longer as the announcement time is here! This isn’t everything we’ve got coming up, but will give you a taste of what to expect.

Share This Image »

First up, go to Facebook, Twitter, friends, etc and please share this Promo Image. This will help us spread the word about our upcoming (and existing) products and keep bringing these amazing pieces to life. You can share the promo image from our Facebook page by clicking here. Thanks! We all appreciate the support!

2014previewflyer

Adrian Majkrzak’s Black Moth [Heavy] »

blackmothheavy_lrg

This Heavy Trooper, the first of a 3-person squad, comes from a new collaborative duo of artists joining our roster. Helmet can be displayed in place of the head, or held in the free hand with a full portrait head. Sculpted in 1/8 scale by Mike Kime of Epic Games.

Visit iMech Sh0p Page for the ‘Black Moth [Heavy]‘ here »

Click the ‘Notify Me’ link at the top of the page to get an email when this product is ready for preorders.

Calum Watt’s ‘The Hopper’ »

hopper_lrg

From the concept artist behind our Freaky Gothic figure release! This 1/35 scale flyer comes with 3 figures! (1 standing and 2 pilots seated back-to back) Sculpted by the talented Stefano Bernardi.

Visit iMech Sh0p Page for ‘The Hopper’ here »

Click the ‘Notify Me’ link at the top of the page to get an email when this product is ready for preorders.

Derek Stenning’s EK Cosmonaut Series »

ekpromo2

An all new 3-figure series by Derek Stenning and Gene Campbell, the team-up that brought you Dystopic! This series of <b>1/8 scale</b> figures will be released throughout 2014. Each will have a laser-etched base which will interlock with the other two. The first figure is 95% ready for printing so watch for him in early 2014!

Visit iMech Sh0p Page for EK Cosmonaut #1 here »
Visit iMech Sh0p Page for EK Cosmonaut #2 here »
Visit iMech Sh0p Page for EK Cosmonaut #3 here »

Click the ‘Notify Me’ link at the top of the page to get an email when these products are ready for preorders.

Christophe Desse’s L’Estafette »

estafette_lrg

Another amazing creation by Christophe Desse, designer behind the Red Star 47 and many of our figure sets. This 1/35 scale roadster comes with three figures and two different sets of tires for either mag-rims or photoetched wire rims.

Visit iMech Sh0p Page for the ‘L’Estafette’ here »

Click the ‘Notify Me’ link at the top of the page to get an email when this product is ready for preorders.

Christophe Arnold’s Walrus and Figures »

walrus_lrg

The Walrus is a large beefy APC designed and 3D sculpted by the talented Christophe Arnold. Match this up with Michael Herm’s Rook and other modern military kits for some great diorama possibilities! This large 1/35 scale armored personnel carrier and 4 figure set will be a great addition to any sci-fi or armor modelers collection!

Visit iMech Sh0p Page for the ‘Walrus’ here »

Click the ‘Notify Me’ link at the top of the page to get an email when this product is ready for preorders.

Solid, Liquid, and Gas Containers »

solids_lrg liquids_lrg gasses_lrg

One of the rare “real world” products we’ve developed. Each 1/35 scale set will cost $25 and be available in January 2014.

Visit iMech Sh0p Page for the ‘Solid Container Set’ here »
Visit iMech Sh0p Page for the ‘Liquid Container Set‘ here »
Visit iMech Sh0p Page for the ‘Gasses Container Set‘ here »

Click the ‘Notify Me’ link at the top of the page to get an email when these products are ready for preorders.

iMech News 3.13.2013

31313 News! Got a nice update for you today! Mike Jensen Drone Sniper’s 3D print images, Final images of Christophe Desse’s L’Estafette, and Manchu Steam Car update!

Mike Jensen’s Drone Sniper »

Before you’ve heard the shot, you’re already dead. The 1/8 scale Drone Sniper print is done and ready for casting. The print looks amazing and if all goes well with the casting quote, it’ll be our most affordable large scale figure yet, which is the goal for our 1/8 scale figure line.

dronesniperannouncement

Preorder Starts: 3.20.2013
Shipping: Late April 2013
Price: TBD (sorry, but soon!)

Click here to get a Drone Sniper Notify Me email.

 

Manchu’s Steam Car »

steamcarannouncement

Philippe Bouchet, aka Manchu’s 1/35 Steam Car is just about ready for production. The figures, modeled by Pedram Karimfazli, are complete and look great in the car. We should have a final, color render of that soon. Meanwhile, here’s a shot of the Steam Car and Figures separately. Preorders start in April 2013!

 

Christophe Desse’s L’Estafette »

Here’s the final images of Christophe Desse’s 1/35 L’Estafette w/figures (included with kit!). Of note are the new rims. After some feedback and research of wire rims done with photoetch, we realized that it’s difficult to design, (not really a problem for us) difficult to cast as we wouldn’t want to split the wheels in half like more PE/Resin wire wheels do for 1/35 motorcycles so would mean each wheel would have 5-6 parts that would have to fit PERFECTLY and resin shrinkage is always a problem, and difficult for the average modeler to do correctly the first time without needing extra wheels (why most 1/35 motorcycle kits don’t have wire wheels as the default). So what we’re going to do is have the wheels be 4 cool dieselpunk mag wheels, with two optional hubcaps for the rear wheels. We may do an optional set of wire wheels if there’s enough interest. Let us know!

im-estafette-i im-estafette-j

 

It’s Fish Fry Friday!

That’s right folks, it’s time for some oceanic fun with the all new Prof. FichtenFoo’s Implausible Fish-Shaped Submersible and Christophe Desse’s Submariners and Skipper! All three of these Steampunk-styled kits are in 1/35 scale. All three will be shipping in Early April at the latest. The Skipper is the long awaited pilot for the original Fantastical Fish-Shaped Submersible (which is in stock now @ $99) and comes with a new seat and control sticks. Will be great for ships, balloons, etc!

Implausible Long-Nose Submersible » $99 + Shipping
Christophe Desse’s Submariners
» $35 + Shipping
Christophe Desse’s Skipper
» $18 + Shipping

Buy These Items Together and Save!

Long-Nose Submersible + Submariners: $129
Fantastical Fish-Shaped Submersible + Skipper: $114

iMech News 2.19.2013

Time for a steamy edition of iMech news! In this episode, we update you on Friday’s Steampunk preorders, show off Christophe Desse’s L’Estafette roadster, and finally show the Orb Ship I’ve been working on as well as put the 2nd Edition up for Preorders!

Fish-Fry Friday »

longnosefish_lrg

First up, the new fish sub, Prof. FichtenFoo’s Implausible Long-Nose Submersible goes up for preorder on Friday March 1, 2013 along with Christophe Desse’s Submariners and the Skipper. All three of these Steampunk-styled kits are in 1/35 scale. All three will be shipping in Early April at the latest. The Skipper is the long awaited pilot for the original Fantastical Fish-Shaped Submersible (which is in stock now) and comes with a new seat and control sticks. Will be great for ships, balloons, etc!

Prof. FichtenFoo’s Implausible Long-Nose Submersible » $99 + Shipping

Christophe Desse’s Submariners » $35 + Shipping

Christophe Desse’s Skipper » $18 + Shipping

submariners_lrg skipper_lrg longnosefish_07_lrg skipper_01_lrg submariners_01_lrg

L’Estafette Renders »

Christophe Desse has posted some fantastic renders of his upcoming 1/35 scale L’Estafette. I love these because they look like finished plastic figures. Cool stuff coming in May 2013!

gpu-w gpu-x gpu-y gpu-z

FichtenFoo’s Orb Ship Build-up »

fichtenfoo-imech-orb-wp

I finished up my Orb Ship build-up last week after putting it aside for several months while working on other masters and product launches. It’s a really fun build and if you haven’t had a chance to get one, you can preorder the next edition on Friday. Here’s the pics of my build-up and more detailed info/tutorials on the build can be found on my blog at FichtenFoo.com.

Scott Robertson’s Orb Ship 2nd Ed Preorder »

osmain

The Scott Robertson 1/48 scale Orb Ship‘s 2nd Edition will be available for PREorder on Friday 3.1.2013 as well. This very large ship is $155 + Shipping.

iMech News 1.25.2013

Greetings from beyond the… something… something! Time for another iMech news update.

Slight Red Star 47 Delay »

redstar47_med

Terribly sorry as I just found out yesterday… I was expecting Red Star 47 resin around February 5th, but the delivery has been pushed a week or two back to around the 10th-15th of February. You can thank the flu for this one unfortunately. But I’ll have the boxes labeled, prefilled with etch, decals, instructions and wire and ready to go as soon as the resin is in-hand.

The Ground Crew and Pilot sets are still on-time and non-bundled orders of those will go out as planned.

Kallamity’s Kastor (on-time!) »

kastor_med

Just an update that the resin is on-time and the Kastor preorders will be shipping on February 6th!

Preorder your Kastor Hovertank here!

Christophe Desse Submariners PLUS »

submariners_01_lrg

Here’s a photo I received yesterday from the 3D printer of the Submariner prints. Looking cool! And what’s that seated guy on the left-hand side for? Why that’s a pilot for the original Fish-Shaped Submersible! He’ll be sold separately for those of you that want a pilot for your prior and future Fantastical Fish Sub orders. All will be available for preorder in February along with the new Implausible Long-Nosed Fish-Shaped Submersible.

Rook and Pawn Brigade Figure Prints »

pawnbrigade_02_lrg

Last but not least, here’s another photo I received from the printer yesterday of the Rook pilot (2/kit) and the Pawn Brigade masters.

iMech 2013 Flyer #1 »

And a look at our next printed flyer for shows and packages. This is the back, but the front… the front is a secret unannounced product!

imech2013aflyer

iMech News 1.14.2013

Hi everyone. So it’s been about 1 year now since our first official Industria Mechanika product, Ian McQue’s Remora started shipping out. Since then we’ve done two more editions of it and a LOT of other products. Thank you all again for your support. I know the economy is crap right now, but our collaborators, vendors and I appreciate your business and loyalty as many of you are repeat customers, some of whom have bought every kit we’ve released. I know our release schedule is… random at best. I really try to keep the schedule on track, but with different collaborators (with full-time jobs aside from this), casters and vendors all contributing to the same products, plus with 30+ different products in production at any given time, that can be difficult. The holiday season has wreaked havok on it as well, but we adapt and carry on! So without further adieu, the news…

Michael Herm’s Rook »

Sorry, sorry, sorry!!!! This has been pushed back a little more, so for those of your emailing me, concerned that you missed it (about 50 of you so far, LOL!) no worries! I reset the preorder start date to 2.15.2013 (Be sure to click the notify link on the order page to get an email when it’s ready and add our sales@ address to your NOT SPAM filter.) and that should be the last reset.

rook2

There was a few items that needed last minute tweaks noticed by the 3D printer… parts that were too thin to cast properly. I love that they check our work to help ensure a great end product! We’re also working on finalizing the box art and I should be able to start on the instructions this week as well. What I don’t want to do is start a preorder-period that ends up extended with production delays. That’s happened a few times and it’s a hassle for you guys. Better we have a good idea on the actual release date and do the preorder start a few weeks (not months) before that. Again, sorry for the delays, but this will be an amazing kit. So to summarize:

Rook/Pawn Preorder Start Date: No later than 2.15.2013
Rook/Pawn Shipping Date: No later than 3.15.2013
Rook Price: TBD (depends on casting/print costs)
Pawn Price: TBD (depends on casting/print costs)

Ian McQue’s Waldo First Look »

I’ve been hinting at this one for a while now and finally you can see what’s coming up!

waldo-00

The 1/35 scale Waldo is a smaller airship than the Remora with a hull length of about 14cm/5.5in and width of 5.5cm/3in. It’s more of a tug/maintenance craft than a hauler, but will feature a cargo rack on the transom that you can fill up with all manner of storage. This kit will be a truly multimedia experience with a laser-cut wood deck (prototype seen below), photoetch wheelhouse/roof and details, resin parts, decals, and various threads and wires.

I (FichtenFoo) am working on the master currently which is why I haven’t done a paint-up of many of our recent releases yet. The Waldo is about 60% done I think. I had the hull 3D-printed without details so that I can add those myself. I’m doing it this way mainly because it’s a difficult hull shape and I wanted the laser-cut deck to fit nicely. I also needed the hull to be hollow so that I can add a full engine inside of it since you should be able to see through deck grating, all the way through the ship creating a really nice layered effect.

waldo-01

I expect to be finished with the master in February at which time it’ll go immediately into production. Not sure of the final price yet as there’s a lot of components to price as you can imagine. Hopefully the Waldo will be shipping some time in May. Watch for it to be added to the store for notifications soon!

Red Star 47 Print Materials »

The Red Star’s print materials are going to the printer today and will be back early next week in plenty of time for the release. Here’s a preview and be sure to preorder yours here »

rs-boxart rs-insts rs-figs

 

iMech News 11.18.2012

Hi Everyone! I’m not even sure where to begin this time as so much has been happening. I’ll start off with an upcoming product announcement, detail some changes/additions to the store, touch on the upcoming changes to the “notify me” system, talk about sales, and finally the usual housekeeping in regards to preorders, restockes, etc…

Christophe Desse’s ‘Estafette’ »

If you follow Industria Mechanika or Christophe Desse on Facebook, you may already be aware of this one. For those not in the loop, we present “Her Majesty’s Estafette” by Christophe Desse! Christophe Desse is the same artist that’s bringing us the Red Star 47, Flight Ready, Ground Crew, Aviators and Submariners! In other words, he’s doing a LOT of stuff for iMech and there’s lot’s more to come! Look for this to be available in April 2013.

esta-01 esta-02

 

New iMech Release Schedule »

Speaking of April 2013, I’ve been checking over everything we’ve got in production currently and making a more structured release schedule. This first year of our business has been hit and miss with the release schedule due to various things, but one can either learn from the mistakes or keep repeating them. I’ve always valued the mistakes as they help us evolve. I feel like we’re finally at a point where we can reliably meet our schedule thanks to our now utilizing 4-5 different casting firms and having a backlog of completed projects to pull from. Now we can with some degree of certainty hit our scheduled preorder/release dates. We’ve got 40+ different pieces current;y in production, most of which we’ve not announced! So stay tuned (and start saving) for an amazing 2013!

The New iMech Store »

I don’t know about you guys, but the new store is making things a LOT easier and more organized. One of the new features for those that register with the store is the ability to sign-up for an upcoming newsletter as well as recieve real-time notifications to changed made on the individual products. This means we’ll be phasing out the old “Notify Me” system and start using the built-in store one. You’ll have to register, but it’ll be worth the trouble. This also means that any new product we announce will also be entered into the store system. It’ll say out of stock, but you’ll be able to see the expected release date so you can plan ahead. The main list is at the bottom of the store home page. Here’s what’s listed so far:

Item Name Date Expected
Her Majesty’s Estafette 04/01/2013
The “Squid-Shaped Submersible” 03/01/2013
Manchu’s Steam Car 02/01/2013
Calum Watt’s Freaky Gothic 02/01/2013
Mike Jensen’s Drone Sniper 02/01/2013
The Rook 01/01/2013
1/35 Pawn Brigade 01/01/2013
1/35 Submariners 01/01/2013
FichtenFoo’s Implausible Long-Nose Submersible 01/01/2013
1/35 Ground Crew 12/15/2012
1/35 Flight Ready 12/15/2012
Red Star 47 12/15/2012
The T-Zero 12/01/2012
1/35 Aviators 11/16/2012
The Hornethopter 11/16/2012

 

Aviators and Hornethopter!

The Hornet is back, and this time has an all new pilot sculpted by Christophe Desse! Also check out our new Aviators set to go with it! I’ll have these in stock by December 7th so will be starting preorders now!

Order both and save $5!

hornet_lrg

Preorder the Hornethopter »

aviators_lrg

Preorder the Aviators »

November Specials »

Dmitry Parkin’s Vampire $15 off!
Dustbuster + Barrio Guy 1/35 Save $15 on the pair! (limited time left!!!)
Fish-Shaped Sub + Sea Life Etch! Save $10 on the pair!
Ian McQue’s Sky Mark Save $10 on Two!
The Hornethopter and Aviators Save $5 on both! (limited time offer!)

Preordered Item Updates! »

First up is the preorder info. I have several casters working diligently on getting these done so that I can get them out the door and into your hands.
Deckhands 1/35: Available Now
Deckhands 1/24:
Available Now
Sasha 1/24:
Available now!
Barrio 1/24:
Avialable now!
Barrio 1/35:
Available Now!
Chompbot #5, Troopers, Pilots: Now Shipping and Available!
The Dustbuster: Shipping by 12.7.2012
Ian McQue’s SkyMark: Shipping by 12.7.2012
Hornethopter: Shipping by 12.7.2012
Aviators: Shipping by 12.7.2012
Dystopic: Shipping by 12.7.2012

 

iMech News 9.26.2012

News! News! News!!! Lots of news today, but all good! Chompbot Sale, Ian McQue’s Sky Mark, Christophe Desse’s Aviators and Submariners, Dawn of the Apocalypse, FichtenFoo’s Long Nose Fish Sub, and Miguel Lopez Dustbuster!

Chompbot #5 Preorder Event

Don’t miss out on saving $10 on the Chompbot #5 and Chomp Troopers! Sale ends Friday at Midnight! (EST) Also check out my build-up pics of the Chompbot pre-release sample parts I’ve received so far from the casters.

ffcb-08

 

Ian McQue Sky Mark Print Materials and Art!

The Sky Mark production is coming along nice and quick! I’ll have 50 (out of 100 first ed) kits in a few weeks. No preorder for these so first come first served when the sale page starts. Meanwhile, enjoy this new Ian McQue art for the Sky Mark buoy as well as the instructions/box label pics.

buoyart-01

 

Dustbuster Print Materials

Dustbuster coming in another month or so! Meanwhile enjoy these packaging pics:

dbcover dbinstructions

 

Christophe Desse’s Aviators

Coming in about 30 days, Chistophe Desse’s Aviators! These 4 Steampunk inspired figures are sold as a set. The seated pilot will also be included with the Hornethopter’s next edition (also coming soon!) to replace the old pilot.

aviators-00 aviators-01

 

Christophe Desse’s Submariners

This maritime quartet will also be sold as a set and is the perfect accessory for our submersible releases! Set includes two swimmers and two “land-lubbers”. Available in about 60 days!

swimmers-01 swimmers-02 swimmers-03 swimmers-04

 

Longnose Fish Submersible Pilot Print

And the inspiration behind the Submariners is of course the Long Nose Fish Sub pilot that Christophe Desse also did for us. Here’s a few shots of the pilot print. Christophe is also working on a seated pilot that can be used for the original Fish Sub as well!

fishsub2pilot-02 fishsub2pilot-print

 

Dawn of the Apocalypse!

B2_box_cen

Finally… Announcing Dawn of the Apocalypse! These figures were designed and produced by us at Industria Mechanika for Dark World Creations. Check out the sexy and zombified creations below. More figures and post apocalyptic car kit mod sets on the way! The girls Ginger and Krystal were sculpted by David Richardson. Zombies Jared and Jessica were sculpted by Pedram Karimfazli. Show these guys some love and get yourself some fantastic 1/24 scale End of Civilization goodness!

 

Preordered Item Updates! »

First up is the preorder info. I have several casters working diligently on getting these done so that I can get them out the door and into your hands.
Ian McQue’s Remora 3rd Ed:  All Units Shipped!!!
Deckhands 1/35: All preordered units in-stock and shipping now!
Deckhands 1/24:
Waiting on casts. Once I receive them I’ll box and ship immediately as usual.
Sasha 1/24:
Available now!
Barrio 1/24:
Avialable now!
Barrio 1/35:
Waiting on casts. Once I receive them I’ll box and ship immediately as usual.
Chompbot #5, Troopers, Pilots: Waiting on casts. Once I receive them I’ll box and ship immediately as usual.
Orb Ship: Waiting on casts. Once I receive them I’ll box and ship immediately as usual.


Upcoming Preorders »

Upcoming preorder items: Dystopic, Dustbuster, and Ian McQue’s Sky Mark.

 

Restocks! »

Sasha 1/35, 1/32: Next batch coming soon for preorder!
Hornethopter: Lots of interest in this little beastie after we sold the last 10 at Wonderfest. I’ll attempt to restock these in October…. need to get some of our new scheduled releases out the door first and get the new pilots and pilot set cast.
FichtenFoo’s Fish-Shaped Submersible: Available Now!
Kastor: Same as the Hornethopter… planning to restock this one early December 2012.

Fill out the Notify Me to get info when a preorder is available for preorders.